Abstract:To investigate the flexural behavioral characteristics of recycled concrete beams under the combined action of steel corrosion and static pre-loading, twelve recycled concrete beam specimens, encompassing a combination of three recycled coarse aggregate (RCA) replacement ratios (0, 50%, 100%) and four static pre-load levels expressed as ratio of the ultimate moment capacity (0, 0.2, 0.4, 0.6), were designed for accelerated corrosion test and four-point bending test. The effects of static pre-load level and RCA replacement ratio on flexural capacity and deformation behavior of corroded beams were studied. The relationship between the corrosion depth of longitudinal tension steel bars and the width of corrosion-induced longitudinal cracks was analysed, and theoretical degradation models for the ultimate moment capacity and the yield moment capacity of corroded beams were established. The test results indicated that under a given RCA replacement ratio of the beams, the maximum width of corrosion-induced longitudinal cracks exhibited a linear relationship with the corresponding corrosion depth of longitudinal tension reinforcement. For the beam specimens with 50% RCA replacement ratio, when the applied static pre-load level increased from 0 to 0.6, the ultimate load and ultimate deflection respectively reduced by 10.4% and 21.2%, whereas for the beam specimens with 100% RCA replacement ratio, the corresponding reduction of ultimate load and ultimate deflection were respectively 8.9% and 35.5%. From the proposed theoretical degradation models, analytical values of ultimate moment capacity and yield moment capacity of corroded recycled concrete beams were in good agreement with the experimental values. This study provides useful reference for practical analysis of recycled concrete beams, which promotes the sustainability of concrete construction.

Research on the flexural capacity of corroded recycled aggregate concrete beams by finite elements method

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Analytical Model to Predict Residual Flexural Capacity of Recycled Aggregate Concrete Beams with Corroded Longitudinal Rebars

Flexural Behavior of Corroded Reinforced Recycled Aggregate Concrete Beams

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Experimental study on flexural capacity of reinforced concrete beams in marine environment

The combined effect of load and corrosion on the flexural performance of recycled aggregate concrete beams

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

Flexural stiffness of recycled aggregate concrete beams under combined effect of load and steel corrosion

Experimental Analysis on Flexural Performance of Fair-faced Recycled Concrete Beams

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete

Residual strengths of reinforced concrete beams with heavy deterioration

EXPERIMENTAL INVESTIGATION AND DESIGN OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

BENDING RESISTANCE BEHAVIOR OF SEVERELY CORRODED REINFORCED CONCRETE BEAM

NUMERICAL INVESTIGATION OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

Recycled concrete beams subjected to combined reinforcement corrosion and static pre-loading

Flexural capacity prediction of steel fiber reinforced concrete beam with recycled fine and coarse aggregate

Flexural Behavior of Corroded Concrete Beams Strengthened with Carbon Fiber-Reinforced Polymer