Abstract:To investigate the flexural behavioral characteristics of recycled concrete beams under the combined action of steel corrosion and static pre-loading, twelve recycled concrete beam specimens, encompassing a combination of three recycled coarse aggregate (RCA) replacement ratios (0, 50%, 100%) and four static pre-load levels expressed as ratio of the ultimate moment capacity (0, 0.2, 0.4, 0.6), were designed for accelerated corrosion test and four-point bending test. The effects of static pre-load level and RCA replacement ratio on flexural capacity and deformation behavior of corroded beams were studied. The relationship between the corrosion depth of longitudinal tension steel bars and the width of corrosion-induced longitudinal cracks was analysed, and theoretical degradation models for the ultimate moment capacity and the yield moment capacity of corroded beams were established. The test results indicated that under a given RCA replacement ratio of the beams, the maximum width of corrosion-induced longitudinal cracks exhibited a linear relationship with the corresponding corrosion depth of longitudinal tension reinforcement. For the beam specimens with 50% RCA replacement ratio, when the applied static pre-load level increased from 0 to 0.6, the ultimate load and ultimate deflection respectively reduced by 10.4% and 21.2%, whereas for the beam specimens with 100% RCA replacement ratio, the corresponding reduction of ultimate load and ultimate deflection were respectively 8.9% and 35.5%. From the proposed theoretical degradation models, analytical values of ultimate moment capacity and yield moment capacity of corroded recycled concrete beams were in good agreement with the experimental values. This study provides useful reference for practical analysis of recycled concrete beams, which promotes the sustainability of concrete construction.

Analytical Model to Predict Residual Flexural Capacity of Recycled Aggregate Concrete Beams with Corroded Longitudinal Rebars

Cracking of Reinforced Recycled Aggregate Concrete Beams Subjected to Loads and Steel Corrosion

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

Performance of Recycled Concrete Beams under Sustained Loads Coupled with Chloride Ion (cl−) Ingress

Experimental Study and Analytical Model of Concrete Cover Spalling Induced by Steel Corrosion

Flexural stiffness of recycled aggregate concrete beams under combined effect of load and steel corrosion

Evaluation of Main Code Models for Predicting Flexural Load-Bearing Capacity Against Intermediate Crack-Induced Debonding in Frp-Strengthened Rc Beams

Residual strengths of reinforced concrete beams with heavy deterioration

Deflection and Crack Calculation of Corroded Reinforced Concrete Beams

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Flexural Behavior of Corroded Reinforced Recycled Aggregate Concrete Beams

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Performance of Reinforced Concrete Beams Corroded under Sustained Service Loads: A Comparative Study of Two Accelerated Corrosion Techniques

Research on the flexural capacity of corroded recycled aggregate concrete beams by finite elements method

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

The combined effect of load and corrosion on the flexural performance of recycled aggregate concrete beams

Time-dependent reliability analysis of reinforced concrete beams subjected to bending and marine atmospheric environment

EXPERIMENTAL INVESTIGATION AND DESIGN OF SEVERELY CORRODED REINFORCED CONCRETE BEAMS

Recycled concrete beams subjected to combined reinforcement corrosion and static pre-loading

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion