Abstract:Anion exchange membrane fuel cells (AEMFC) have received significant attention for their promised low production cost, largely enabled by the facile kinetics of the oxygen reduction reaction in alkaline electrolytes and the broader selection of potential ionomers. 1,2 The performance of AEMFCs has been improved significantly by utilizing AEM with high ion exchange capacity (IEC) and optimizing membrane electrode structures. 3 However, some fundamental issues limiting the performance of AEMFCs need to be better understood, especially the reaction kinetics at the catalyst-ionomer interface and the transport process at the multi-phase boundaries in the membrane electrode assembly (MEA). 4,5 In this talk, we will present a systematic diagnostic study of the critical performance-limiting factors in AEMFC. We will discuss the reaction kinetics at the Pt/ionomer interface and the oxygen transport characteristics of the ionomer layer based on electrochemical data. In addition, we correlate the electrode pore structure, reaction kinetics, and mass transfer behavior with the cell performance based on the analysis of a series of MEA with varied multi-phase boundary designs. Further, experimental data will be presented with decoupled polarization behavior of both the anode and cathode of working AEMFCs. The results reveal that the deteriorated mass transport at the anode and the restricted reaction kinetic at the cathode are the crucial factors limiting the performance of AEMFC, which need to be addressed with high priority. References Wang, Y-J., Qiao, J., Baker, R., Zhang J. Chem. Soc. Rev. , 2013 , 42 , 5768. Chen, N., Hu, C., Lee, Y. M. et al., Angew. Chem. Int. Ed. 2021 , 60 , 7710–7718. Huang, G., Mandal, M., Mustain, W. E., Kohl P. A. et al., J. Electrochem. Soc. 2019 , 166 , F637–F644. Dekel, D. R., J. Power Sources 2018 , 375 , 158e169. Jiang, H., Luo, R., Li, Y., Chen, W. EcoMat. 2022 , 4 , e12199. Acknowledgement Financial support from the National Key R&D Program of China (No. 2021YFB4001203) is greatly acknowledged.

Study on the key materials for realizing electrolyte-free fuel cell and semiconductor-ionic membrane fuel cell

Progress in Electrolyte-Free Fuel Cells

Study on Zinc Oxide-Based Electrolytes in Low-Temperature Solid Oxide Fuel Cells

Advanced Electrolyte-Free Fuel Cells Based on Functional Nanocomposites of a Single Porous Component: Analysis, Modeling and Validation

Key Materials and Progress of Fuel Cells

Designing p-n heterostructure of LSCF-CeO2 material for ionic transportation as an electrolyte for semiconductor ion membrane fuel cell

Functional Semiconductor–ionic Composite GDC–KZnAl/LiNiCuZnOx for Single-Component Fuel Cell

The composite electrolyte materials for low-temperature solid oxide fuel cell

Novel high ionic conductivity electrolyte membrane based on semiconductor La0.65Sr0.3Ce0.05Cr0.5Fe0.5O3-δ for low-temperature solid oxide fuel cells

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

Validating the efficiency of γ-Al2O3/La0.6Sr0.4Co0.2Fe0.8O3-δ double-layer electrolyte for low temperature solid oxide fuel cell

Performance of fuel cells with proton-conducting ceria-based composite electrolyte and nickel-based electrodes

Recent Progress in Semiconductor-Ionic Conductor Nanomaterial as a Membrane for Low-Temperature Solid Oxide Fuel Cells

Preparation and application of LiSiC-oxide for low temperature solid oxide fuel cells

Enhanced ionic transport and performance with a built-in electric field impact in LSCF-LCP double layer electrolyte

Advanced LT-SOFC Based on Reconstruction of the Energy Band Structure of the LiNi0.8Co0.15Al0.05O2–Sm0.2Ce0.8O2-δ Heterostructure for Fast Ionic Transport

Electrochemical Properties of a Dual-Ion Semiconductor-Ionic Co0.2Zn0.8O-Sm0.20Ce0.80O2−δ Composite for a High-Performance Low-Temperature Solid Oxide Fuel Cell

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

High Performance Low-Temperature Solid Oxide Fuel Cells Based on Nanostructured Ceria-Based Electrolyte

(Digital Presentation) Diagnostic Study of the Key Performance-Limiting Factors in Anion Exchange Membrane Fuel Cells