Abstract:The distribution of ice in the cathode catalyst layer (CCL) of a proton exchange membrane fuel cell (PEMFC) has a significant impact on cold start. A three-dimensional multiphase numerical model for fuel cell cold start was developed to investigate the first-order finite difference sensitivities of seven selected parameters, namely gas diffusion layer (GDL) porosity, CCL porosity, ionomer volume fraction, inlet temperature, initial membrane water content, catalyst layer (CL) surface area, and initial current, with respect to the uniformity of ice distribution and cold start failure time. Six of these parameters were chosen as inputs for a CNN-Transformers based neural network (CTnet), which was developed using Convolutional Neural Networks (CNN) and the multi-head attention mechanism of Transformers as a surrogate model for cold start. The optimization algorithm PSO-GA was used to find the optimal operating and geometric parameters, aiming to achieve the most uniform ice distribution in the CCL and extend the final cold start failure time. The optimized ice distribution uniformity was found to be 0.204446, showing a 1.1163 % improvement compared to the baseline model. The final cold start failure time was extended by 15.625 % to 185 s compared to the baseline model. The optimized model exhibited a more uniform distribution of ice during cold start, resulting in an extended cold start failure time. This indicates a reduced performance impact on the CCL, thereby improving the durability of the fuel cell. The optimization provides additional time for future auxiliary cold starts, while also enhancing the starting speed of auxiliary cold start through improved ice distribution uniformity.

Revealing failure modes and effect of catalyst layer properties for PEM fuel cell cold start using an agglomerate model

A Pem Fuel Cell Model for Cold-Start Simulations

Ice Formation and Current Distribution in the Catalyst Layer of PEM Fuel Cell at Cold Start

Numerical studies of cold-start phenomenon in PEM fuel cells

Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures

Numerical Studies of Cold-Start Phenomena in PEM Fuel Cells: A Review

Theoretical analysis on cold start process of proton exchange membrane fuel cell with different flow fields based on the coupling of redox reaction and dynamic response of porous materials

Analysis of the Failure Modes in the Polymer Electrolyte Fuel Cell Cold-Start Process—Anode Dehydration or Cathode Pore Blockage

Freeze Start of Proton Exchange Membrane Fuel Cell Systems with Closed-Loop Purging and Improved Voltage Consistency

Modeling of Fuel Cell Cold Start and Dimension Reduction Simplification Method

Cold Start Capability and Durability of Electrospun Catalyst Layer for Proton Exchange Membrane Fuel Cell

Multi-objective optimization of ice distribution uniformity and startup failure time for cold start of PEMFC catalyst layer based on CTnet and PSO-GA

Research on Water and Heat Management in the Cold Start Process of Proton Exchange Membrane Fuel Cell with Expanded Graphite Bipolar Plate

Enhanced operational performance of PEM fuel cells with Porous-Carbon catalyst support: A multiscale modeling approach

Study on internal dynamic response during cold start of proton exchange membrane fuel cell with parallel and serpentine flow fields

Numerical Research on the Cold Start-up Strategy of a PEMFC Stack from −30°C

Numerical Simulation of the Cold-Start Process of Polymer Electrolyte Fuel Cell

Research on Cold Start of Proton-Exchange Membrane Fuel Cells Based on Model Predictive Control

A new insight into the effects of agglomerate parameters on internal dynamics of proton exchange membrane fuel cell by an advanced impedance dimension model

Effects of porous properties on cold-start behavior of polymer electrolyte fuel cells from sub-zero to normal operating temperatures

Numerical Investigation of Cold-Start Behavior of Polymer Electrolyte Fuel Cells in the Presence of Super-Cooled Water