Abstract:The existing models of proton-exchange membrane fuel cells, such as computational fluid dynamics and lumped-parameter models, cannot provide a comprehensive description of mass-transport mechanisms without incurring a high computational load. This paper proposes a reduced-dimension dynamic model of fuel cells that considers main mass-transport mechanisms, including two-phase flow in the gas diffusion layer. Under the quasi-steady-state assumption, the distributions of liquid water and gas species in the through-plane direction are calculated through analytical expressions. Thus, the reduced-dimension fuel-cell model can obtain a similar output to a one-dimensional model without needing to solve partial differential equations. The reduced-dimension model was validated on steady state and transient experimental data. The computational load of the reduced-dimension model was only 1/60 that of a one-dimensional model. To simulate the transient behavior of the fuel-cell system, the reduced-dimension fuel-cell model was integrated with a comprehensive balance-of-plant model. The system model could execute long-time-scale transient simulations and evaluate the internal states of the fuel cell while minimizing the computing resources. Finally, the contradiction between the power response rate and oxygen starvation under the load-delay strategy was analyzed with the system model, and the delay duration was optimized. Results verify the potential of the reduced-dimension model in control-oriented applications. Novelty statement The existing models of proton-exchange membrane fuel cells, such as computational fluid dynamics and lumped-parameter models, cannot provide a comprehensive description of mass-transport mechanisms without incurring a high computational load. This work proposes a reduced-dimension dynamic model of fuel cells that considers main mass-transport mechanisms, including two-phase flow in the gas diffusion layer. Under the quasi-steady-state assumption, the distributions of liquid water and gas species in the through-plane direction are calculated through analytical expressions. Thus, the reduced-dimension fuel-cell model can obtain a similar output to a one-dimensional model without needing to solve partial differential equations. The computational load of the reduced-dimension model was only 1/60 that of a one-dimensional model.

Modeling of Fuel Cell Cold Start and Dimension Reduction Simplification Method

A Pem Fuel Cell Model for Cold-Start Simulations

Numerical studies of cold-start phenomenon in PEM fuel cells

Numerical Studies of Cold-Start Phenomena in PEM Fuel Cells: A Review

Optimization of fast cold start strategy for PEM fuel cell stack

Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures

Cold Start of PEMFC Using Alternating Hydrogen Pump: Part I. Mechanistic Modeling

Freeze Start of Proton Exchange Membrane Fuel Cell Systems with Closed-Loop Purging and Improved Voltage Consistency

Modelling, validation and analysis of preheating strategy of fuel cell vehicle during Subzero cold start

Research on Cold Start of Proton-Exchange Membrane Fuel Cells Based on Model Predictive Control

A single-phase, non-isothermal model for PEM fuel cells

Numerical Investigation of Cold-Start Behavior of Polymer Electrolyte Fuel Cells in the Presence of Super-Cooled Water

A 1 + 1-D Multiphase Proton Exchange Membrane Fuel Cell Model for Real-Time Simulation

Experimental Study on Cold Start Strategies of Fuel Cell Stack: Sensitivity Analysis, Optimization, and Boundaries

A Reduced‐dimension Dynamic Model of a Proton‐exchange Membrane Fuel Cell

Cold Start Mode Classification Based on the Water State for Proton Exchange Membrane Fuel Cells

Transient Computation Fluid Dynamics Modeling of A Single Proton Exchange Membrane Fuel Cell with Serpentine Channel

Optimization of purge strategy under fuel cell startup conditions based on CFD-Simulink collaborative simulation

Numerical Simulation of the Cold-Start Process of Polymer Electrolyte Fuel Cell

An Adiabatic Cell As a Model for Stack in PEFC Cold Start Study

Study on Fast Cold Start-Up Method of Proton Exchange Membrane Fuel Cell Based on Electric Heating Technology