Abstract:To attain more uniform CCL temperature and higher power density, multi‐objective optimization is performed by combining the NSGA II and a PEMFC model. The gradient‐decline distribution of ionomer towards MPL contributes to the larger power density and effective utilization of ionomer. After optimization, the CCL temperature becomes more uniform by affecting the local oxygen transport resistance across the ionomer film and the reaction rate. Low voltage and high RH conditions are highly sensitive to the ionomer‐gradient design. Summary Temperature uniformity (TU) of the cathode catalyst layer (CCL) and the power density are two key parameters to describe a fuel cell durability and performance. To achieve desired TU and output performance, a one‐dimensional, non‐isothermal, two‐phase model coupled with a CCL agglomerate submodel is developed and validated in terms of the polarization curve, ohmic impedance and total oxygen transport resistance. Then, the ideal ionomer‐gradient distribution across the triple‐layer CCL is attained by a combination of Non‐dominated Sorting Genetic Algorithm II (NSGA II) and TOPSIS. The results present that the gradient‐decline distribution of ionomer towards the microporous layer (MPL) contributes to the larger power density and effective utilization of ionomer. The fuel cell can also operate at higher power with a top voltage range (TVR). After optimization, the ideal ionomer‐gradient distribution affects the distribution of the total heat source by affecting the local oxygen transport resistance across the ionomer film and the volumetric current density (Jc ). As a result, the maximum temperature point in CCL is more likely to occur near the MPL and the CCL temperature becomes more uniform. Besides, the optimum ionomer‐gradient values tend to be different in various operating voltages and RH cases. However, low voltage and high RH conditions are more highly sensitive to the ionomer‐gradient design. It is possible to maintain a proper TU and desired output performance by optimizing the CCL gradient structure, especially for the stationary PEMFC that operates with a particular condition for a long time. Research Highlights A 1D, non‐isothermal, two‐phase model is validated from multiple aspects. Multi‐objective optimization is performed by combining the NSGA II and numerical model. More uniform CCL temperature and higher power density are achieved after optimization.

Multi-objective optimization of ice distribution uniformity and startup failure time for cold start of PEMFC catalyst layer based on CTnet and PSO-GA

Enabling real-time optimization of dynamic processes of proton exchange membrane fuel cell: Data-driven approach with semi-recurrent sliding window method

Multi-Objective Operating Parameters Optimization for the Start Process of Proton Exchange Membrane Fuel Cell Stack with Non-Dominated Sorting Genetic Algorithm II

A Pem Fuel Cell Model for Cold-Start Simulations

Coupled optimization of auxiliary channels and porosity gradient of GDL for PEMFC

Many-objective optimization of graded cathode catalyst layer for PEMFC on performance, gas distribution quality, and cost via AI-based model

Optimization of fast cold start strategy for PEM fuel cell stack

Freeze Start of Proton Exchange Membrane Fuel Cell Systems with Closed-Loop Purging and Improved Voltage Consistency

Revealing failure modes and effect of catalyst layer properties for PEM fuel cell cold start using an agglomerate model

Improvement of the three-dimensional fine-mesh flow field of proton exchange membrane fuel cell (PEMFC) using CFD modeling, artificial neural network and genetic algorithm

Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures

Multi‐objective optimization of temperature uniformity in cathode catalyst layer and performance of PEMFC with an ionomer‐gradient design

Research on Cold Start of Proton-Exchange Membrane Fuel Cells Based on Model Predictive Control

Numerical studies of cold-start phenomenon in PEM fuel cells

Multi-objective optimization of gradient gas diffusion layer structures for enhancing proton exchange membrane fuel cell performance based on response surface methodology and non-dominated sorting genetic algorithm-III

Multi-objective Optimization of Comprehensive Performance Enhancement for Proton Exchange Membrane Fuel Cell Based on Machine Learning

Comprehensive performance assessment and multi-objective optimization of high-power proton exchange membrane fuel cell system under variable load

Optimization of purge strategy under fuel cell startup conditions based on CFD-Simulink collaborative simulation

Microscale structure optimization of catalyst layer for comprehensive performance enhancement in proton exchange membrane fuel cell

Multi-objective optimization of the cathode catalyst layer micro-composition of polymer electrolyte membrane fuel cells using a multi-scale, two-phase fuel cell model and data-driven surrogates

Numerical Research on the Cold Start-up Strategy of a PEMFC Stack from −30°C