Erratum to: Structure, Kinematics, and Prototyping of a Parallel Manipulator with a Remote Center of Rotation

V. A. Glazunov,P. A. Laryushkin,K. A. Shalyukhin,Laryushkin, P. A.

DOI: https://doi.org/10.1134/s1052618824010151

2024-03-28

Journal of Machinery Manufacture and Reliability

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1052618824010151

What problem does this paper attempt to address?

Erratum to: Inverse Kinematics of a 5-DOF Hybrid Manipulator

A. V. Antonov,A. S. Fomin

DOI: https://doi.org/10.1134/s0005117923070111

2023-10-03

Automation and Remote Control

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S0005117923070111

automation & control systems,instruments & instrumentation
Error Modeling of Parallel Robots for Semi-Physical Simulation Platform of Space Docking Mechanism

Dayong Yu,Weifang Chen,Hongren Li

DOI: https://doi.org/10.1016/j.proeng.2011.08.082

2011-01-01

Procedia Engineering

Abstract:The parallel robot for semi-physical simulation platform of space docking mechanism is taken as the structure model, by treating each sun-chain of the parallel robot as a joint-link train, thus the error model in which structural parameter errors are considered is established from the kinematic equations and the loop properties of parallel structure. The error model is verified by computer simulation, and the results indicate that the error model established in this paper can approximately report the changing trend of the actual pose errors in the case where the parameter errors are small enough.
Corrigendum to “trajectory Tracking Control of Parallel Manipulator Based on Udwadia-Kalaba Approach”

Chenming Li,Han Zhao,Shengchao Zhen,Kang Huang,Hao Sun,Ke Shao,Bin Deng

DOI: https://doi.org/10.1155/2019/9808792

IF: 1.43

2019-01-01

Mathematical Problems in Engineering

Abstract:have been described below and corrected in place.Dr.
Correction: Zhao et al. A Closed-Form Inverse Kinematic Analytical Method for Seven-DOF Space Manipulator with Aspheric Wrist Structure. Machines 2024, 12, 632

Guojun Zhao,Bo Tao,Du Jiang,Juntong Yun,Hanwen Fan

DOI: https://doi.org/10.3390/machines12120874

IF: 2.899

2024-12-03

Machines

Abstract:Machines, Vol. 12, Pages 874: Correction: Zhao et al. A Closed-Form Inverse Kinematic Analytical Method for Seven-DOF Space Manipulator with Aspheric Wrist Structure. Machines 2024, 12, 632 Machines doi: 10.3390/machines12120874 Authors: Guojun Zhao Bo Tao Du Jiang Juntong Yun Hanwen Fan Text Correction [...]

engineering, mechanical, electrical & electronic
Kinematics Analysis of 3-PCR Parallel Robot Mechanism

李波,陈安军

DOI: https://doi.org/10.13952/j.cnki.jofmdr.2009.05.029

2009-01-01

Abstract:The kinematics analysis of a novel 3-DOF parallel manipulator was investigated.Based on the motion constraint equation of the 3-PCR parallel manipulator,the inverse displacement solutions of the parallel manipulator were presented.Then the forward displacement solutions were obtained via Bezout's elimination method,and some numerical examples were given in order to prove the correctness of the inverse and forward displacement solutions.The models of velocity and acceleration relationships between three output motions and three input parameters were discussed,the forward and inverse solutions of velocity and acceleration were given.At last,the planning trajectory was verified through examples and simulation.
Error Modeling and Experimental Validation of a Planar 3-PPR Parallel Manipulator with Joint Clearances

Guanglei Wu,Shaoping Bai,Jorgen A. Kepler,Stephane Caro

DOI: https://doi.org/10.1115/1.4007487

2012-01-01

Journal of Mechanisms and Robotics

Abstract:This paper deals with the error modeling and analysis of a 3-PPR planar parallel manipulator with joint clearances. The kinematics and the Cartesian workspace of the manipulator are analyzed. An error model is established with considerations of both configuration errors and joint clearances. Using this model, the upper bounds and distributions of the pose errors for this manipulator are established. The results are compared with experimental measurements and show the effectiveness of the error prediction model.
Correction to "dynamic Modeling and Control for a Deployable Grasping Manipulator"

Guotao Li,Hailin Huang,Hongwei Guo,Bing Li

DOI: https://doi.org/10.1109/access.2019.2908270

IF: 3.9

2019-01-01

IEEE Access

Abstract:In the above paper [1] , the second author’s biography was incorrectly listed as:
Corrections to "Micropositioning and Control of an Underactuated Platform for Microscopic Applications"

Kihan Park,Jaydev P. Desai

DOI: https://doi.org/10.1109/tmech.2024.3352838

2024-02-23

IEEE/ASME Transactions on Mechatronics

Abstract:Presents corrections to the paper, Micropositioning and Control of an Underactuated Platform for Microscopic Applications.

automation & control systems,engineering, electrical & electronic, manufacturing, mechanical
Correction: Zhang G. et al. Autonomous Operation Method of Multi-DOF Robotic Arm Based on Binocular Vision. Appl. Sci. 2019, 9, 5294

Yiyao Fan,Xueying Lv,Jun Lin,Jianhang Ma,Guanyu Zhang,Liu Zhang

DOI: https://doi.org/10.3390/app10103344

2020-05-12

Applied Sciences

Abstract:We, the authors, wish to make the following corrections to our paper [...]
Erratum to: On the Lack of Controllability in Naive Mechanics Models: Three Exceptional Cases

Romanov, I. V.

DOI: https://doi.org/10.3103/S0025654423330014

2023-04-21

Mechanics of Solids

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S0025654423330014

mechanics
Error Analysis And Calibration Of 3-Dof Parallel Manipulator

Han Shukui,Fang Yuefa,Zhu Dachang

2006-01-01

Abstract:Through the analysis of a parallel robotic mechanism with two translational and one rotational degree of freedom, the error model of parallel manipulator was established by use of differential theory. The analysis shows that the method can be used in evaluating the accuracy of prismatic parallel manipulators. By computer simulation the influences upon the accuracy of robotic manipulator of robotic manipulator affected by the translational error of driving pair the parametric error of structure and posture variation were analyzed thus provided theoretical bases for practical error calibration and control of this robotic manipulator.
Actual Kinematics Performance Analysis for Lower Degrees of Freedom Parallel Manipulators

Guo Sheng

2009-01-01

Journal of Mechanical Engineering

Abstract:For lower degree of freedom parallel robot,the relations between revolute pair and prismatic pair are analyzed by using screw theory.According to the relations,the constraint errors due to manufacturing and installation are proposed.Three basic types of constraint errors are identified,and an approach to evaluating the effects of constraint errors on characteristics of parallel manipulators is proposed.The modeling for the lower degree of freedom parallel robot with identical limbs of constraint errors is established.The actual motion is analyzed in order to validate the theory.
Erratum: Zhao et al. Robust and Efficient Trajectory Replanning Based on Guiding Path for Quadrotor Fast Autonomous Flight. Remote Sens. 2021, 13, 972

Yinghao Zhao,Li Yan,Yu Chen,Jicheng Dai,Yuxuan Liu

DOI: https://doi.org/10.3390/rs13142791

IF: 5

2021-07-16

Remote Sensing

Abstract:The authors wish to make the following corrections to this paper [...]

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Dynamics and Control of Redundantly Actuated Parallel Manipulators

H Cheng,YK Yiu,ZX Li

DOI: https://doi.org/10.1109/tmech.2003.820006

2003-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:It has been shown that redundant actuation provides an effective means for eliminating singularities of a parallel manipulator, thereby improving its performance such as Cartesian stiffness and homogeneous output forces. Based on this concept, several high-performance parallel manipulator prototypes have been designed. A major difficulty that prevents application of the vast control literature. developed for the serial counterparts to redundantly actuated parallel manipulators is the lack of an efficient dynamical model for real-time control. In this paper, using the Lagrange-D'Alembert formulation, we propose a simple scheme for computing the inverse dynamics of a redundantly actuated parallel manipulator. Based on this approach, four basic control algorithms, a joint-space proportional derivative (PD) control, a PD control in generalized coordinates, an augmented PD control, and a computed-torque control, are formulated. A two-degrees-of-freedom redundantly acutated parallel manipulator designed for a high-speed assembly task is used to verify the simplicity of the proposed approach and to evaluate the performance of the four control algorithms.
Conceptual Design and Kinematic Analysis of a Novel Parallel Manipulator with an Articulated Gripping Platform

Yimin Song,Yang Qi,Tao Sun

DOI: https://doi.org/10.1007/978-3-319-23327-7_38

2016-01-01

Abstract:This paper proposes a novel parallel manipulator with an articulated gripping platform, which would be considered as the gripping manipulator to grip rigid bodies with irregular shape and large weight. This novel manipulator can achieve three rotations about one fixed point and the gripping motion. The articulated gripping platform is considered as a planar 4R (R denotes Revolute kinematic joint) mechanism that would be folded continuously by four actuated limbs. After analysing the kinematics of the articulated gripping platform, the inverse position analysis and motion mapping modelling of this novel manipulator is carried out successively in this paper. Finally, a typical example is given to verify the kinematic model.
Erratum: Zhao et al. Robust and Efficient Trajectory Replanning Based on Guiding Path for Quadrotor Fast Autonomous Flight. <i>Remote Sens.</i> 2021, <i>13</i>, 972

Yinghao Zhao,Li Yan,Yu Chen,Jicheng Dai,Yuxuan Liu

DOI: https://doi.org/10.3390/rs13142791

IF: 5

2021-01-01

Remote Sensing

Abstract:The authors wish to make the following corrections to this paper [...]
Design And Kinematics Of A Novel Three Dof Parallel Manipulator

Ketao Zhang,Yuefa Fang,Chuangfeng Huai

2007-01-01

Abstract:A novel 3-DOF parallel manipulator is presented that can be found in a cube paper fold, based on the concept of mechanisms. The parallel manipulator consists of a base plate, a movable platform, and four connecting legs. The moving platform has three degrees of freedom, which are two degrees of rotational freedom and one degree of translational freedom, with respect to the base plate. Each of the connecting leg contains a closed-loop subchain, which is symmetrical six-bar spherical metamorphic mechanism. The new parallel manipulator is very interesting for the reason of only revolute joint architecture, identical limb kinematic chain and symmetrical structure. The configuration design of the new parallel manipulator is introduced. The concept of generalized kinematic pair and screw theory are applied to the mobility analyses of the novel parallel manipulator. And the analysis results provide information on motion characteristics of the parallel manipulator. The inverse and forward kinematics problems are described. The proposed manipulator has a wide application in the fields of industrial robots, simulators, micro-motion manipulators, and parallel kinematics machines.
Erratum: Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors

Frontiers Production Office

DOI: https://doi.org/10.3389/frobt.2023.1228130

2023-06-13

Abstract:[This corrects the article DOI: 10.3389/frobt.2023.1028411.].
Erratum to: Magneto-Biological Physics

A. L. Buchachenko

DOI: https://doi.org/10.1134/s1990793124340025

IF: 1.296

2024-12-13

Russian Journal of Physical Chemistry B

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1990793124340025

physics, atomic, molecular & chemical
Error modelling and experimental validation for a planar 3-PPR parallel manipulator

guanglei wu,shaoping bai,jorgen asbol kepler

DOI: https://doi.org/10.1109/ICAR.2011.6088573

2011-01-01

Abstract:In this paper, the positioning error of a 3-PPR planar parallel manipulator is studied with an error model and experimental validation. First, the displacement and workspace are analyzed. An error model considering both configuration errors and joint clearance errors is established. Using this model, the maximum positioning error was estimated for a U-shape PPR planar manipulator, the results being compared with the experimental measurements. It is found that the error distributions from the simulation is approximate to that of the measurements.

Erratum to: Structure, Kinematics, and Prototyping of a Parallel Manipulator with a Remote Center of Rotation

Erratum to: Inverse Kinematics of a 5-DOF Hybrid Manipulator

Error Modeling of Parallel Robots for Semi-Physical Simulation Platform of Space Docking Mechanism

Corrigendum to “trajectory Tracking Control of Parallel Manipulator Based on Udwadia-Kalaba Approach”

Correction: Zhao et al. A Closed-Form Inverse Kinematic Analytical Method for Seven-DOF Space Manipulator with Aspheric Wrist Structure. Machines 2024, 12, 632

Kinematics Analysis of 3-PCR Parallel Robot Mechanism

Error Modeling and Experimental Validation of a Planar 3-PPR Parallel Manipulator with Joint Clearances

Correction to "dynamic Modeling and Control for a Deployable Grasping Manipulator"

Corrections to "Micropositioning and Control of an Underactuated Platform for Microscopic Applications"

Correction: Zhang G. et al. Autonomous Operation Method of Multi-DOF Robotic Arm Based on Binocular Vision. Appl. Sci. 2019, 9, 5294

Erratum to: On the Lack of Controllability in Naive Mechanics Models: Three Exceptional Cases

Error Analysis And Calibration Of 3-Dof Parallel Manipulator

Actual Kinematics Performance Analysis for Lower Degrees of Freedom Parallel Manipulators

Erratum: Zhao et al. Robust and Efficient Trajectory Replanning Based on Guiding Path for Quadrotor Fast Autonomous Flight. Remote Sens. 2021, 13, 972

Dynamics and Control of Redundantly Actuated Parallel Manipulators

Conceptual Design and Kinematic Analysis of a Novel Parallel Manipulator with an Articulated Gripping Platform

Erratum: Zhao et al. Robust and Efficient Trajectory Replanning Based on Guiding Path for Quadrotor Fast Autonomous Flight. <i>Remote Sens.</i> 2021, <i>13</i>, 972

Design And Kinematics Of A Novel Three Dof Parallel Manipulator

Erratum: Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors

Erratum to: Magneto-Biological Physics

Error modelling and experimental validation for a planar 3-PPR parallel manipulator