Erratum to: Inverse Kinematics of a 5-DOF Hybrid Manipulator

A. V. Antonov,A. S. Fomin

DOI: https://doi.org/10.1134/s0005117923070111

2023-10-03

Automation and Remote Control

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S0005117923070111

automation & control systems,instruments & instrumentation

What problem does this paper attempt to address?

Erratum to: Structure, Kinematics, and Prototyping of a Parallel Manipulator with a Remote Center of Rotation

V. A. Glazunov,P. A. Laryushkin,K. A. Shalyukhin,Laryushkin, P. A.

DOI: https://doi.org/10.1134/s1052618824010151

2024-03-28

Journal of Machinery Manufacture and Reliability

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1052618824010151
A Solution of Inverse Kinematics for 7-DOF Manipulators and Its Application

Q. -L. Huang,J. Wu,R. Xiong

DOI: https://doi.org/10.1109/wcica.2012.6359091

2012-01-01

Abstract:This paper provides a solution of inverse kinematics for 7-DOF manipulators, which is derived by homogeneous transformation matrix described in equivalent angle-axis representation. The end-effector's posture calculated by this approach has excellent precision. The manipulator can avoid collision and singularity while meeting the parameters of the joints through the optimization of the redundancy. Moreover, in order to increase the comfort level of the arm, we improve the method based on Jacobian pseudo-inverse to calculate the angular velocity. The time it takes is so short that it can be applied to on-line application. We applied this method to a manipulator of a ping-pong robot and proved its validity.
Correction: Zhao et al. A Closed-Form Inverse Kinematic Analytical Method for Seven-DOF Space Manipulator with Aspheric Wrist Structure. Machines 2024, 12, 632

Guojun Zhao,Bo Tao,Du Jiang,Juntong Yun,Hanwen Fan

DOI: https://doi.org/10.3390/machines12120874

IF: 2.899

2024-12-03

Machines

Abstract:Machines, Vol. 12, Pages 874: Correction: Zhao et al. A Closed-Form Inverse Kinematic Analytical Method for Seven-DOF Space Manipulator with Aspheric Wrist Structure. Machines 2024, 12, 632 Machines doi: 10.3390/machines12120874 Authors: Guojun Zhao Bo Tao Du Jiang Juntong Yun Hanwen Fan Text Correction [...]

engineering, mechanical, electrical & electronic
A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

REN Ziwu,ZHU Qiuguo,XIONG Rong

DOI: https://doi.org/10.3901/jme.2014.19.058

2014-01-01

Abstract:There are innumerable inverse kinematics solutions that can meet the demand of end-effector position and orientation for the redundant humanoid manipulator. Also each manipulator joint has its physical constraints for the connecting rod structure and figuration design. In order to make the inverse kinematics solution away from the joint position limitation maximization, an algorithm that combines geometry method and numerical iterative method is proposed to solve the inverse kinematics problem of redundant humanoid manipulator(8-DOF). Based on the derived geometric formula of the inverse kinematics problem, the "Away Limitation Level" of the humanoid manipulator is adopted as fitness function and optimization goal, and then particle swarm optimization(PSO) is used to search for the optimal combination of the redundant joint, and the optimal inverse kinematics solution can be obtained in this method. The proposed method can not only solve the multiple inverse kinematics solutions problem of the redundant humanoid manipulator, but also have some advantages, i.e., the solution no theoretical error, fast solving speed and the large margin away from the joint position limitation. Numerical simulation results demonstrate the effectiveness of this algorithm.
An Efficient Inverse Kinematic Algorithm for a PUMA560-Structured Robot Manipulator

Huashan Liu,Wuneng Zhou,Xiaobo Lai,Shiqiang Zhu

DOI: https://doi.org/10.5772/56403

IF: 1.714

2013-01-01

International Journal of Advanced Robotic Systems

Abstract:Abstract This paper presents an efficient inverse kinematics (IK) approach which features fast computing performance for a PUMA560-structured robot manipulator. By properties of the orthogonal matrix and block matrix, the complex IK matrix equations are transformed into eight pure algebraic equations that contain the six unknown joint angle variables, which makes the solving compact without computing the reverses of the 4×4 homogeneous transformation matrices. Moreover, the appropriate combination of related equations ensures that the solutions are free of extraneous roots in the solving process, and the wrist singularity problem of the robot is also addressed. Finally, a case study is given to show the effectiveness of the proposed algorithm.
Modeling and Compensation of Motion Errors for 6-DOF Robotic Manipulators

Xuan Huang,Lingbao Kong,Guangxi Dong

DOI: https://doi.org/10.3390/app112110100

2021-01-01

Applied Sciences

Abstract:Six degree-of-freedom (6-DOF) robotic manipulators have been increasingly adopted in various applications in industries due to various advantages, such as large operation space, more degrees of freedom, low cost, easy placement, and convenient programming. However, the robotic manipulator has the problem of insufficient stiffness due to the series structures, which will cause motion errors of the manipulator end. In this paper, taking a 6-DOF robotic manipulator as an example, forward and inverse kinematics models are established, and a new modeling method for the joint angle and space stiffness of the end of the manipulator is proposed, which can establish the composite stiffness model of joint link stiffness and joint stiffness. An error compensation model is subsequently established. The experimental results indicate that the proposed error compensation method can effectively reduce the end motion error of the robotic manipulator, and hence, the working performance and accuracy of the manipulator can be improved. The proposed research is helpful for extending the application of robotic manipulators in precision machining and measurement.
Corrigendum: Haptic Glove Using Tendon-Driven Soft Robotic Mechanism

Siyeon Baik,Shinsuk Park,Jaeyoung Park

DOI: https://doi.org/10.3389/fbioe.2020.630005

IF: 5.7

2020-12-11

Frontiers in Bioengineering and Biotechnology

Abstract:[This corrects the article DOI: 10.3389/fbioe.2020.541105.].

multidisciplinary sciences
An improved inverse kinematics solution for 6-DOF robot manipulators with offset wrists

Xing Zhou,Yaoqi Xian,Yuanhao Chen,Tongshu Chen,Lin Yang,Simin Chen,Jian Huang

DOI: https://doi.org/10.1017/s0263574721001648

IF: 2.7

2022-01-14

Robotica

Abstract:Abstract Efficiently solving inverse kinematics (IK) of robot manipulators with offset wrists remains a challenge in robotics due to noncompliance with Pieper criteria. In this paper, an improved method to solve the IK for 6-DOF robot manipulators with offset wrists is proposed. This method is based on the Newton iteration technique, but it does not require a selection of initial estimation of joint variables. The solution is divided into two parts: the first part is to reconstruct a simplified structure with analytical IK solution, and the second part is to obtain a numerical solution by iteration. Further, a robot manipulator HSR-BR606 with an offset wrist is used as an example to specifically elaborate the mathematical procedure of the method and to investigate the algorithm in terms of accuracy, efficiency, and application of motion planning. A comparative experiment is conducted with a typical IK algorithm, which demonstrates a higher accuracy and shorter calculation time of the proposed method. The mean calculation time for a single IK solution required for this algorithm is only 4% of the comparison algorithm.

robotics
Correction: Zhang G. et al. Autonomous Operation Method of Multi-DOF Robotic Arm Based on Binocular Vision. Appl. Sci. 2019, 9, 5294

Yiyao Fan,Xueying Lv,Jun Lin,Jianhang Ma,Guanyu Zhang,Liu Zhang

DOI: https://doi.org/10.3390/app10103344

2020-05-12

Applied Sciences

Abstract:We, the authors, wish to make the following corrections to our paper [...]
Erratum to: On the Lack of Controllability in Naive Mechanics Models: Three Exceptional Cases

Romanov, I. V.

DOI: https://doi.org/10.3103/S0025654423330014

2023-04-21

Mechanics of Solids

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S0025654423330014

mechanics
A novel inverse kinematics scheme for the design and fabrication of a five degree of freedom arm robot

Amin Zarrin,Saber Azizi,Mortaza Aliasghary

DOI: https://doi.org/10.1007/s40435-019-00558-1

2019-06-25

International Journal of Dynamics and Control

Abstract:In this paper, analysis and fabrication of a laboratory model of a five degree of freedom arm robot for pickup and drop applications along with the governing kinematics is investigated. SolidWorks and SimMechanics were applied as the design-fabrication and motion analysis softwares, respectively. To reduce the weight and power consumption and improve the manufacturing time, plexiglas was used as the fabrication material. A novel geometric approach for the inverse kinematics is proposed and as a consequence the addition of the orientation of the specimen along with the location of the end effector as the inputs of the inverse kinematics problem, resulted in the improved workspace and minimum computational error, which enhanced the robot efficiency. The proposed novel inverse kinematics scheme is based on the formulation of the end effector position in terms of the global coordinates and the geometry of the robot; and accordingly determining the join angles in terms of the governing parameters and the desired end effector position. The proposed method led to a considerable reduction of positioning error. In order to validate the simulation outputs, the corresponding results are compared to those of the laboratory model.

English Else
Erratum to The fifty most cited publications in shoulder arthroplasty research

DOI: https://doi.org/10.1177/17585732221124203

Abstract:[This corrects the article DOI: 10.1177/1758573221989669.].
Erratum: Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors

Frontiers Production Office

DOI: https://doi.org/10.3389/frobt.2023.1228130

2023-06-13

Abstract:[This corrects the article DOI: 10.3389/frobt.2023.1028411.].
Erratum: 404 Mechanisms of a Dynamic Stability Protocol for Persons with Thumb Osteoarthritis - CORRIGENDUM

Corey McGee,Halil Ibrahim Ergen,Paula Ludewig,Ann Brearley,Ann Van Heest,Erin Krebs

DOI: https://doi.org/10.1017/cts.2024.528

2024-05-07

Abstract:[This corrects the article DOI: 10.1017/cts.2024.351.].
An Experimental Study of a Redundantly Actuated Parallel Manipulator for a 5-DOF Hybrid Machine Tool

Liping Wang,Jun Wu,Jinsong Wang,Zheng You

DOI: https://doi.org/10.1109/tmech.2008.2008096

2009-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:This paper deals with the experimental study of a redundantly actuated parallel manipulator for a 5-DOF hybrid machine tool. Based on the kinematics of the redundantly actuated parallel manipulator, the inverse dynamics is derived by using the virtual work principle. A position and force switching control strategy is used for the two extendible chains of the parallel manipulator. Further, the difference predictive control is presented for the extendible chain with force mode. The parallel manipulator is incorporated into a 5-DOF hybrid machine tool. Linear and circular contouring experiments of both the hybrid machine tool as well as its corresponding nonredundant counterpart with the redundant limb removed are conducted to evaluate the machine performance. Finally, the machine experiment is used to demonstrate the machine's applicability.
Elastodynamic modeling and structural error compensation for a 5-DOF parallel mechanism with subclosed loops

Xuhao Wang,Shuangshuo Wang,Mengli Wu,Dongyang Lv,Xusheng Shi,Binglin Li,Zhiyong Guo

DOI: https://doi.org/10.1177/09544062231213491

2023-12-28

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In order to reduce the adverse effects of structural errors on a novel 5-degrees of freedom (DOF) parallel kinematic mechanism (PKM) with subclosed loops, studies on the elastodynamic modeling and structural error compensation are conducted in this paper. First, considering that introduction of subclosed loops significantly increased the complexity and difficulty of elastodynamic modeling, an equivalent unit modeling method for the branch chain with subclosed loop is proposed based on force analysis and deformation compatibility condition. Then, elastodynamic model of the whole 5-DOF PKM is established with the matrix structural analysis based method. Second, by defining a six-dimensional error (three translational errors and three rotational errors) for each node, structural error model of the PKM is constructed based on closed-loop vector method. To consider the coupling effects of static and dynamic structural errors, the dynamic structural errors derived by above elastodynamic model would be substituted into the structural error model along with given static structural errors. Finally, structural error compensation optimization model is established and structural errors are compensated by adjusting the driven parameters based on the improved particle swarm optimization (PSO) algorithm. Numerical simulations are conducted to verify the proposed elastodynamic modeling and structural error compensation methods. After compensation, the position errors along x, y, and z directions are respectively decreased by 68.036%, 81.409%, and 90.625%, and the angle errors around x and y directions are respectively decreased by 91.426% and 62.042%.

engineering, mechanical
Kinematics and Control for a Personal Robot with Five Degrees-of-freedom Arms

Hongbo Wang

DOI: https://doi.org/10.1109/icnsc.2007.372830

2007-01-01

Abstract:The paper describes the kinematics and control of a robot with two arms that have five degrees of freedom and presents a method how to give a position and orientation of hand for inverse position analysis. Using the method presented in the paper, the parameters of inverse position analysis can easily be specified provided the position and orientation given is within the workspace of the arm. To control the robot, a servo system is presented. The control principle and the software architecture of the servo system are described. Finally, a calculation example of inverse position analysis is given.
A New Inverse Kinematics Method for Three Dimensional Redundant Manipulators

Mohamed, H.A.F.,Yahya, S.,Moghavvemi, M.,Yang, S.S.

2009-01-01

Abstract:This paper describes a new geometrical method to solve the inverse kinematic problem for hyper redundant manipulators. The proposed method finds one solution from these infinite solutions. By using this method, the angles between each adjacent links are the same, which makes controlling the movement of these links easier and makes a lining up of two or more joint axes not possible, i.e. very effective for avoiding singularities. A comparison between the proposed manipulator and the PUMA manipulator has been carried out. The manipulability index of both manipulators has been calculated to show the effectiveness of the proposed method. Experiments have been conducted on three links manipulator.
Kinematics Modeling And Workspace Analysis Of A 5-Dof Hydraulic Manipulator

Feiteng Li,Xiaocong Zhu,Jian Cao,Bin Yao

DOI: https://doi.org/10.1109/ICCAR.2019.8813334

2019-01-01

Abstract:This paper focused on the kinematic modeling and workspace analysis of a 5 degrees of freedom(DOF) heavy-duty hydraulic manipulator system, which consists of four linear hydraulic cylinder and one rotary hydraulic cylinder. The kinematics model of the hydraulic manipulator is analyzed by modified D-H method (I-type kinematics) and geometric mapping algorithm (II-type kinematics) and is validated with simulation comparison of kinematic response predicted by theoretical kinematic modeling. Then, the workspace of the hydraulic manipulator is analyzed through random point method in SimMechanics. Lastly, The influence of cylinder stroke upon available workspace place is presented.
Inverse Kinematics and Dynamics of A Novel 3-Axis Hybrid Machine Tools

JX Yang,DW Yu,JS Wang

DOI: https://doi.org/10.3901/cjme.2004.supp.244

2004-01-01

Abstract:This paper presents the formulation of the inverse kinematics and dynamics of a novel 3-axis hybrid machine tools. This machine tools is based on a 2-DOF parallel platform and serial kinematic chain. The position analysis is firstly performed. The velocity and acceleration formulas of the links and sliders are derived. The forces acting on the joints can be determined according to the force and moment equilibriums of the links. Subsequently the driving forces of the actuators are derived from the force equilibrium of the sliders. The sensitivities model construction of inverse kinematics and dynamics to the errors of motion models' parameters are developed. The presented approach can also be applied to other less DOF parallel manipulators.

Erratum to: Inverse Kinematics of a 5-DOF Hybrid Manipulator

Erratum to: Structure, Kinematics, and Prototyping of a Parallel Manipulator with a Remote Center of Rotation

A Solution of Inverse Kinematics for 7-DOF Manipulators and Its Application

Correction: Zhao et al. A Closed-Form Inverse Kinematic Analytical Method for Seven-DOF Space Manipulator with Aspheric Wrist Structure. Machines 2024, 12, 632

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

An Efficient Inverse Kinematic Algorithm for a PUMA560-Structured Robot Manipulator

Modeling and Compensation of Motion Errors for 6-DOF Robotic Manipulators

Corrigendum: Haptic Glove Using Tendon-Driven Soft Robotic Mechanism

An improved inverse kinematics solution for 6-DOF robot manipulators with offset wrists

Correction: Zhang G. et al. Autonomous Operation Method of Multi-DOF Robotic Arm Based on Binocular Vision. Appl. Sci. 2019, 9, 5294

Erratum to: On the Lack of Controllability in Naive Mechanics Models: Three Exceptional Cases

A novel inverse kinematics scheme for the design and fabrication of a five degree of freedom arm robot

Erratum to The fifty most cited publications in shoulder arthroplasty research

Erratum: Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors

Erratum: 404 Mechanisms of a Dynamic Stability Protocol for Persons with Thumb Osteoarthritis - CORRIGENDUM

An Experimental Study of a Redundantly Actuated Parallel Manipulator for a 5-DOF Hybrid Machine Tool

Elastodynamic modeling and structural error compensation for a 5-DOF parallel mechanism with subclosed loops

Kinematics and Control for a Personal Robot with Five Degrees-of-freedom Arms

A New Inverse Kinematics Method for Three Dimensional Redundant Manipulators

Kinematics Modeling And Workspace Analysis Of A 5-Dof Hydraulic Manipulator

Inverse Kinematics and Dynamics of A Novel 3-Axis Hybrid Machine Tools