Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ester hydrolysis to alcohol using a combined reactive and extractive distillation with ionic liquids-based mixed solvents

A new hybrid reactive-extractive distillation configuration for ternary azeotropic separation with intensification opportunity

Eco-efficient heat-integrated extractive distillation process using ionic liquid as entrainer for ethyl acetate-isopropyl alcohol-water mixture

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Energy-saving investigation of ester hydrolysis to alcohol by reaction extractive distillation process: from molecular insight to process integration

Towards sustainable separation of the ternary azeotropic mixture based on the intensified reactive-extractive distillation configurations and multi-objective particle swarm optimization

Transesterification reactive extractive distillation process using ionic liquids as entrainers: From molecular insights to process integration

Development of novel hybrid pre-separation/extractive reactive distillation processes for the separation of methanol/methyl acetate/ethyl acetate

Systematic screening procedure and innovative energy-saving design for ionic liquid-based extractive distillation process

Design and multi-objective optimization of novel side-stream reactive-extractive distillation process with intermediate reboiler for recovering ethanol and 1,4-dioxane from wastewater

Energy-saving exploration and optimization of methyl alcohol – Methyl ethyl ketone – Tertbutyl alcohol separation by extractive dividing-wall distillation with ionic liquid as extractant

Investigation on ternary system tetrahydrofuran/ethanol/water with three azeotropes separation via the combination of reactive and extractive distillation

Design and multi-objective optimization of reactive-extractive dividing wall column with organic Rankine cycles considering safety

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Intensified hybrid reactive-extractive distillation process for the separation of water-containing ternary mixtures

Design and multi-objective optimization of hybrid reactive-extractive distillation process for separating wastewater containing benzene and isopropanol

Economic, environmental, exergy (3E) analysis and multi-objective genetic algorithm optimization of efficient and energy-saving separation of diethoxymethane/toluene/ethanol by extractive distillation with mixed extractants

Extraction of Low-Concentration Bio-Based Diols and Dicarboxylic Acids Using Ionic Liquid-Based Aqueous Two-Phase Systems: Experimental and Theoretical Studies

Toward a Sustainable Azeotrope Separation of Acetonitrile/Water by the Synergy of Ionic Liquid-Based Extractive Distillation, Heat Integration, and Multiobjective Optimization

Dynamic Control Strategy of the Ternary Azeotrope Separation Process Assisted by Reactive-extractive Distillation for Ethyl acetate/Isopropanol/Water

Efficient separation of diisopropyl ether and ethanol using green solvents: Thermodynamic analysis and process simulation