Abstract:Reaction between aluminum and water offers a simple way for hydrogen generation. However, the passive oxide film subsequently formed on Al would become a major obstacle for its continuous reaction. Gallium was proved to be an effective way to remove the passive oxide film through penetrating into Al granules, which fosters the reaction between Al and water. However, fabrications of Al–Ga alloy so far are generally highly time and energy consuming. Here, unlike the existing strategies of using solid state Al-rich alloys for the reaction system, the liquid phase alloy was introduced and prepared to develop an extremely simple source for hydrogen generation where the mass percentage of Al can be less than 1%. Such conceptual innovation would help maintain the alloy in liquid state which thus allows for rather convenient operation. To probe into the methodology, the dynamic hydrogen generation phenomenon of such Al-fed liquid phase GaIn alloy inside NaOH electrolyte was disclosed. According to the experimental observations, the hydrogen was generated mainly at the interface between the liquid metal and the Petri dish rather than the liquid metal-electrolyte interface. Homogenous hydrogen generation only takes place at the liquid–solid interface while heterogeneous hydrogen generation from the moving accumulated Al granules happens on all surfaces. The present finding is expected to open a new way towards low cost and straightforward hydrogen generation. It would also help better understand the mechanisms lying behind as well as the dynamic traveling behaviors of the aluminum powered gallium alloy machine.

Synchronously Producing H 2 and Purifying Methyl Orange-Polluted Water through the Reaction of an Al–GaInSn Alloy Plate and H 2 O

Synchronously Producing H2 and Purifying Methyl Orange-Polluted Water Through the Reaction of an Al-GaInSn Alloy Plate and H2O

In Situ Generation of Hydrogen Peroxide Using Polymetallic-Doped G-C3n4 for Pollutant Removal

Dynamic hydrogen generation phenomenon of aluminum fed liquid phase Ga–In alloy inside NaOH electrolyte

Instant Hydrogen Production Using Ga-In-Sn-Bi Alloy-Activated Al-water Reaction for Hydrogen Fuel Cells

Hydrogen production performance of an Al-Ga-In-Sn quaternary alloy

Preparation of high active Al-Ga-In-Sn alloy by alloying & ball milling method and its hydrogen production via water splitting

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Controlled hydrogen generation using interaction of artificial seawater with aluminum plates activated by liquid Ga–In alloy

Comparative Study on Activation of Aluminum with Four Liquid Metals to Generate Hydrogen in Alkaline Solution

The Superior Hydrogen-Generation Performance of Multi-Component Al Alloys by the Hydrolysis Reaction

Portable Water-Using H-2 Production Materials Converted From Waste Aluminum

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Hydrogen Generation by Splitting Water with Al-Li Alloys

Enhanced hydrogen generation from Al-water reaction mediated by metal salts

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

High-Efficient Generation of H2O2 by Aluminum-Graphite Composite Through Selective Oxygen Reduction for Degradation of Organic Contaminants.

A Facile Temperature-Controlled "Green" Method to Prepare Multi-kinds of High-Quality Alumina Hydrates via a Ga-In-Sn-Alloyed Aluminum-Water Interface Reaction.

Hydrogen Production by the Reaction of Al-based Metals with Water Vapor

Metal Substrate Enhanced Hydrogen Production of Aluminum Fed Liquid Phase Ga–In Alloy Inside Aqueous Solution

Liquid Metal Activated Aluminum-Water Reaction for Direct Hydrogen Generation at Room Temperature