Abstract:Hydrogen is the ideal green fuel and carbon-neutral energy carrier alternative to nonrenewable fuel sources. The high construction cost of hydrogen refueling stations has become one of the limitations to the further promotion and application of hydrogen energy. To realize 8-22 MPa hydrogen compression under mild conditions, the low cost Ti0.95Zr0.07Cr1.7-xMn0.3Fex (x = 0-0.5) alloys were designed and prepared by magnetic levitation melting in this work. The effect of Fe on Cr substitution on the microstructure and hydrogen storage properties of the alloy has been systematically investigated. With the increase of Fe substitution for Cr, all the alloys maintain a single C14 Laves phase, the thermodynamic plateau curve broadens and rises, while the hydrogen storage capacity diminishes slightly. For a better description of the thermodynamic properties of alloys at high temperatures as the function of temperature, a non-linear Van't Hoff fitting is introduced with satisfactory prediction. On account of significant Fe substitution for Cr, the unit cell shrinks and the interstitial size of alloy decreases, an optimal alloying constituent, Ti0.95Zr0.07Cr1.3Mn0.3Fe0.4, has been proposed and experimentally proved for the first time. This alloy exhibits the best overall performances and the plateau pressure is respectively 5.74 MPa for hydro-genation at 283 K and 25.97 MPa for dehydrogenation at 353 K without apparent hysteresis phenomenon. The hydrogen storage capacity is 1.59 wt% within 3 min and dehydrogenation enthalpy is 21.20 kJ/mol H2. This study provides a comprehensive insight into the low-cost hydrogen storage alloy design and application on quick response and high cycle stability metal hydride hydrogen compressors.

Hydrogen Production by the Reaction of Al-based Metals with Water Vapor

Dynamic Process of Hydrogen and Heat Generation from Reaction of Al–Li Alloy Powders and Water Vapor at Moderate Temperatures

Thermogravimetric Analysis of Hydrogen Production of Al–Mg–Li Particles and Water

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Experimental Researches on Hydrogen Generation by Aluminum with Adding Lithium at High Temperature

Hydrogen Production and Temperature Change During the Reaction of Al–Li Alloy with Water Vapor

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Hydrogen Generation and Stoichiometric Hydrolysis of Core–shell Al-Li-NaBH4 Composite

Liquid Metal Activated Aluminum-Water Reaction for Direct Hydrogen Generation at Room Temperature

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Low-cost Vanadium-Free Ti–Zr–Cr–Mn–Fe Based Alloys for Metal Hydride Hydrogen Compressor under Mild Conditions

Instant Hydrogen Production Using Ga-In-Sn-Bi Alloy-Activated Al-water Reaction for Hydrogen Fuel Cells

Current status of aluminium-water reaction for hydrogen production and cogeneration research

Enhanced hydrogen generation from Al-water reaction mediated by metal salts

Metal Substrate Enhanced Hydrogen Production of Aluminum Fed Liquid Phase Ga–In Alloy Inside Aqueous Solution

Hydrogen Generation from the Reaction of Al-based Composites Activated by Low-Melting-point Metals/oxides/salts with Water

Dehydrogenation Performances of Different Al Source Composite Systems of 2libh4 + M (M = Al, LiAlH4, Li3AlH6).

Dynamic reaction process of Al-Mg-Li alloy with water at medium temperature

Experimental study on characteristics and mechanism of hydrogen production from aluminium–water reaction for carbon-free power generation