Abstract:Hydrogen has become a promising energy source due to its efficient and renewable properties. Although promising, hydrogen energy has not been in widespread use due to the lack of high-performance materials for hydrogen storage. Previous studies have shown that the addition of Al-based compounds to LiBH4 can create composites that have good properties for hydrogen storage. In this work, the dehydrogenation performances of different composite systems of 2LiBH4+ M (M = Al, LiAlH4, Li3AlH6) were investigated. The results show that, under a ball to powder ratio of 25:1 and a rotation speed of 300 rpm, the optimum ball milling time is 50 h for synthesizing Li3AlH6 from LiH and LiAlH4. The three studied systems destabilized LiBH4 at relatively low temperatures, and the 2LiBH4-Li3AlH6 composite demonstrated excellent behavior. Based on the differential scanning calorimetry results, pure LiBH4 released hydrogen at 469°C. The dehydrogenation temperature of LiBH4 is 416°C for 2LiBH4-Li3AlH6 versus 435°C for 2LiBH4-LiAlH4 and 445°C for 2LiBH4-Al. The 2LiBH4-Li3AlH6, 2LiBH4-LiAlH4, and 2LiBH4-Al samples released 9.1, 8, and 5.7 wt.% of H2, respectively. Additionally, the 2LiBH4-Li3AlH6 composite released the 9.1 wt.% H2 within 150 min. An increase in the kinetics was achieved. From the results, it was concluded that 2LiBH4-Li3AlH6 exhibits the best dehydrogenation performance. Therefore, the 2LiBH4-Li3AlH6 composite is considered a promising hydrogen storage material.

Hydrogen Production and Temperature Change During the Reaction of Al–Li Alloy with Water Vapor

Dynamic Process of Hydrogen and Heat Generation from Reaction of Al–Li Alloy Powders and Water Vapor at Moderate Temperatures

Experimental Researches on Hydrogen Generation by Aluminum with Adding Lithium at High Temperature

Thermogravimetric Analysis of Hydrogen Production of Al–Mg–Li Particles and Water

Dynamic reaction process of Al-Mg-Li alloy with water at medium temperature

Hydrogen Production by the Reaction of Al-based Metals with Water Vapor

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Dehydrogenation Performances of Different Al Source Composite Systems of 2libh4 + M (M = Al, LiAlH4, Li3AlH6).

Improved hydrogen desorption properties of LiBH4 by AlH3 addition

Effect of Salts Addition on the Hydrogen Generation of Al–LiH Composite Elaborated by Ball Milling

An Al–Li alloy/water system for superior and low-temperature hydrogen production

An Investigation on the Reaction Mechanism of LiAlH4–MgH2 Hydrogen Storage System

Kinetics analysis and reaction characteristics of aluminum-lithium alloys in water vapor

Wet Chemical Synthesis of Non-solvated Rod-Like Α'-Alh3 As a Hydrogen Storage Material.

Effects of Al Adding on the Reversible Hydrogen Properties in LiBH4/Al System

Hydrogen Desorption Kinetics of the Destabilized LiBH 4 AlH 3 Composites

Hydrogen Absorption/desorption Properties of Li–Al–N–H Composite

Hydrogen Storage Properties of LiBH4–Li3AlH6 Composites

Hydrogen Production from Aluminum-Water Reactions at Low Temperatures: Based on an In-Situ Two Powders of Different Particle Sizes

Hydrogen Generation from Mg–LiBH4 Hydrolysis Improved by AlCl3 Addition