Abstract:Abstract Recycled concrete technology can promote the sustainable development of the construction industry, but the insufficient mechanical properties of recycled concrete have become a key constraint on its development. By adding waste fibers, the mechanical properties of recycled concrete can be improved, and the problem of disposing of waste polypropylene fibers can be solved. In this article, the effects of recycled brick aggregate content and waste fiber content on the mechanical properties and microstructures of recycled brick aggregate concrete through macroscopic mechanical experiments and microstructure experiments are investigated. The results show that the addition of recycled brick aggregate reduces the mechanical properties of concrete; when the content of recycled brick aggregate is 100%, the compressive strength and splitting tensile strength decrease by 22.04 and 20.00%, respectively. The addition of waste fibers can improve the mechanical properties of recycled brick aggregate concrete, but it is necessary to control the contents of waste fibers in a certain range. When the content of waste fibers is 0.08%, the best improvement effect on the mechanical properties of concrete is achieved; the compressive strength of concrete with a 50% (100%) recycled aggregate replacement rate increases by 6.06% (8.90%), while the splitting tensile strength of concrete with a 50% (100%) recycled aggregate replacement rate increases by 2.30% (6.16%). Through microstructural analysis, the mechanism by which waste fiber improves the mechanical properties of recycled brick aggregate concrete is revealed. The addition of waste fibers has the effect of strengthening the framework inside the recycled brick aggregate concrete, forming a good structural stress system and allowing the recycled brick aggregate concrete to continue to bear loads after cracking. In this study, waste brick aggregate and waste fiber are effectively utilized, which can not only reduce pollution to the environment but also realize the sustainable utilization of resources.

Research Status and Development Trend of 3D Printing Recycled Concrete

Recent advancements and future trends in 3D printing concrete using waste materials

Utilization of solid mine waste in the building materials for 3D printing

Review on solid wastes incorporated cementitious material using 3D concrete printing technology

3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates

Application and development prospect of 3D printing concrete material in construction field

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Overview of the Development of 3D-Printing Concrete: A Review

Investigation of the rheological and mechanical properties of 3D printed eco-friendly concrete with steel slag

Research progress on recycled clay brick waste as an alternative to cement for sustainable construction materials

3D printing concrete structures: State of the art, challenges, and opportunities

Printability and pore structure of 3D printing low carbon concrete using recycled clay brick powder with various particle features

Pervious Concrete with Secondarily Recycled Low-Quality Brick-Concrete Demolition Residue: Engineering Performances, Multi-Scale/phase Structure and Sustainability

3D printing concrete with recycled coarse aggregates: The influence of pore structure on interlayer adhesion

Utilization of antimony tailings in fiber-reinforced 3D printed concrete: A sustainable approach for construction materials

3D printed concrete with recycled sand: Pore structures and triaxial compression properties

Study on the mechanical properties and microstructure of recycled brick aggregate concrete with waste fiber

The effect of waste powder on the 3D printing performance of cement-based materials

The research progress of concrete recycled powder

State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction

Sustainable materials for 3D concrete printing