Abstract:A multiscale scheme on the bending performance of injection molded products. The characterization of the flexural performances of short glass fiber reinforced polyether‐ether‐ketone (SGFR‐PEEK) composites fabricated by injection molding is a crucial and challenging task due to the process‐induced fiber orientation at different locations, resulting layered shell‐core‐shell microstructures and exhibiting large variations in mechanical performances. This article proposes a method for predicting the bending performance of SGFR‐PEEK and indicates the influence of fiber orientation on its bending behavior. This article reports a new scheme that combines multiscale homogenization with periodic microstructures and presents an experimental investigation of the flexural properties of SGFR‐PEEK composites. The distributions of fiber orientation through the thickness extracted from the micro‐computed tomography (μCT) were analyzed and reproduced with a layered skin‐shell‐core structure along the thickness at meso‐scale finite element model within representative volume elements (RVEs) of the macroscopic composites. Then, the effective properties of the RVEs were predicted using the homogenization method with the periodic boundary condition. The elastic modulus of skin‐shell‐core layers in the direction of flow are 4260.51, 4541.27, 4628.52, and 4630.84 MPa, respectively. The classical laminate theory (CLT) and the second homogenization implementation were then utilized in conjunction with the obtained mechanical properties of RVEs to predict the effective macrostructural behavior. The flexural modulus of the composite material was determined to be 5448.7 MPa through a three‐point bending test. The results obtained through lamination plate reinforcement theory and finite element simulation were 5887.4 and 5785.9 MPa, respectively, showing good agreement with the experimental findings. It is shown that the proposed multiscale scheme yields satisfactory agreement with experimental measurements. In addition, the effect of layered skin‐shell‐core microstructures on the flexural behavior was discussed. Highlights RVEs of layered shell‐core‐shell microstructures were generated with specified fiber orientations. The homogenization scheme with the periodic boundary condition was adopted to accurately predict each layer mechanical properties. The proposed multiscale scheme was compared with experimental results and yielded satisfactory predictions. The effect of layered skin‐shell‐core microstructures on the flexural behavior was thoroughly studied by the multiscale analytical approach.

Multi-scale analysis of the influence of filler shapes on the mechanical performance of resin composites using high resolution nano-CT images

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Effect of silica particle size and filler content on the fracture properties of epoxy resin composite

CAD-CAM resin composites: Effective components for further development

Influence of Filler Particle Sizes on the Physical Properties of Bulk-Fill Composites Compared to Conventional Composites

Interpretable AI Explores Effective Components of CAD/CAM Resin Composites

A multiscale scheme for homogenization to characterize the flexural performances of injection molded short glass fiber reinforced polyether ether ketone composites

Effects of rotating fatigue on the mechanical properties of microhybrid and nanofiller-containing composites.

Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials

Molecular dynamics investigation of structural and mechanical properties of silica nanorod reinforced dental resin composites

Influences of silica size distribution on the performance of dental composite

Polymerization and shrinkage kinetics and fracture toughness of bulk-fill resin-composites

Understanding the Cavitation and Crazing Behavior in the Polymer Nanocomposite by Tuning Shape and Size of Nanofiller

Modified nano-silica by two kinds of coupling agents influences the mechanical properties of resin base

Effect of hybrid reinforcements on the curing kinetics and mechanical properties of light‐cured polymer composites

Two modified multiscale modeling approaches for determination of two-phase and hybrid nanocomposite properties

Effects of Various Filler Surfaces on Tuning the Hierarchical Structures and Reinforcement of Silicone Rubbers

Assessment of Nano-Indentation Method in Mechanical Characterization of Heterogeneous Nanocomposite Materials Using Experimental and Computational Approaches

A multi-scale analysis to predict elastic response in different weight fractions of carbon fiber powder

Supporting data for impact of filler composition on mechanical and dynamic response of 3-D printed silicone-based nanocomposite elastomers

Quantifying the 3D Multiscale Dispersion Structure of Nanofillers in Polymer Nanocomposites by Combining 3D-STEM and Synchrotron Radiation X-ray CT