Abstract:Abstract: The main objective of in this the paper presents the investigation by kenaf fiber of silane usage of regarding silicon (IV) oxide on to using several mechanical tests similar to tensile strength, flexural and impact test are mechanical properties which helps to use in various industrial mechanical commercial applications. The kenaf fiber is soaked in a mixture of ethanol and silicon (IV) oxide which is known as treatment process and the non-hydrated kenaf fiber in untreated process. The plates are arranged to ASTM based on dimension in the form 3 ply’s of kenaf layer is inserted; It is molded with the help of epoxy resin. The composites there was fabricated using the hot press to form plate to Infusion in mixture process by the making of a compressed approximate orientation kenaf mat. The natural kenaf fiber as 50% vol with added of each plate in silicon (IV) oxide of 1%, 2%, and 2.5% there was used to make the hybrid composites. Then various test are flexural, tensile, micro hardness, impact and water absorption test, it is also based on treated and untreated values. These are some of the important stages on the followed in these procedures. Improving the impact of kenaf fiber on crack resistance, durability and mechanical properties in concrete applications. In this research, kenaf fiber is separate in treated and untreated composite materials. The mechanical fields which help to develop the efficiency of the experimental where the kenaf fibre material is being used. The main role of reason for the usage of thismaterial is to avoid plastics. Because of natural fibers are commonly weaker than to synthetic fibers, they tend to weaken mechanically and physically over period due to the porosity of the fibers. The final test performed known as tensile in breakage point to be SEM test, the test we can able to see the 200μ to 500μ range in micro image of this material. The composites with added of 2.5% vol nano silica show greatest mechanical methods of the samples treated with an silica nanoparticles at 264 Mpa and 6352 Mpa for flexural strength, flexural modulus. The effects presented that the adding of nano silica (IV) particles with kenaf fiber in general has a good effect on mechanical properties.

Influences of nano-SiO2 on the tensile, flexural, and compressive characteristics of the open-hole carbon fiber-reinforced polymer laminated composites: Experimental study

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Experimental analysis of tensile strength of 6-layer carbon/kevlar/epoxy hybrid composite reinforced with nano-graphene/silica nanoparticles

Effect of Al2O3 and SiC Nano-Fillers on the Mechanical Properties of Carbon Fiber-Reinforced Epoxy Hybrid Composites

Influence of hybrid nano/micro particles on the mechanical performance of cross-ply carbon fibre fabric reinforced epoxy polymer composite materials

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Mechanical Characterization of Hybrid Nano-Filled Glass/Epoxy Composites

Tensile and compression behavior of woven glass/epoxy nano composites based on spraying methodology

The Effect of Carbon Nanofibers on the Mechanical Performance of Epoxy-Based Composites: A Review

Effect of nanosilica on low‐velocity impact and compression after impact properties of continuous carbon fiber‐reinforced epoxy composites manufactured by 3D printing

Effects of Thickness and Amount of Carbon Nanofiber Coated Carbon Fiber on Improving the Mechanical Properties of Nanocomposites

Experimental Study on Improvement of Interfacial Bond Properties of Carbon Fiber Reinforced Cement Matrix Composites by Nano Silica

Mechanical and dynamic characterization of SiO2 nanofiller-based Luffa cylindrica fibre composites structures using finite element method

Multiple effects of nano-SiO2 and hybrid fibers on properties of high toughness fiber reinforced cementitious composites with high-volume fly ash

Experimental analysis of the flexural and compressive properties of carbon fiber reinforced sandwich panels with M-shaped core

Flexural properties of fiber reinforced concrete containing silica fume and nano-silica

Reinforcing Effect of Organosilane-Grafted CaCO3 Nanoparticles on Mechanical Performance of E-Glass Chopped Strand Mat/Epoxy Composites

Advanced Fiber Metal Laminates Filled with Silicon Dioxide Nanoparticles with Enhanced Mechanical Properties

Experimental investigation on mechanical properties of nanocomposites based on poly lactic acid/ polyolefin elastomer reinforced with multi-walled carbon nanotubes, and graphene nanoplatelets

Effect of Fibre Loading on Mechanical Behavior of Kenaf Fibre and Nano Silica Reinforced epoxy Resin Composite Material with and without Silane Treatment

EFFECT OF CARBON NANOFIBERS ADDITION ON DENSIFICATION AND MECHANICAL PROPERTIES OF CARBON/CARBON COMPOSITES