Abstract:In this paper, the performance of the electronic conventional image motion compensation (IMC) method based on the time delay integration (TDI) mode was analyzed using the optical injection formula of charge coupled devices (CCDs). The result shows that the non-synchronous effect of charge packet transfer caused by line-by-line transfer during exposure makes the compensated image dissatisfying. Then an improved electronic IMC method based on the CCD multiphase structure was proposed. In this method, a series of proper driving clocks were applied to drive the charge packet to move electrode-by-electrode during the exposure time, which results in a minimum non-synchronous effect of charge packet transfer. The mismatch of velocity between charge packet transfer and image motion was decreased. The performance of the improved electronic IMC method was also analyzed using the optical injection formula. The modulation degrees of the two methods were compared. The average value of the modulation degree of the improved electronic IMC method was 47/96, greater than the conventional electronic IMC method, which was 1/3. To achieve the improved electronic IMC, the driver timing diagram of the improved electronic IMC method was proposed. This paper presented an improved hardware implementation method for the improved electronic IMC method. Based on the basic FTF4052M drive circuit system, an IMC pulse pattern generator that worked together with the main pulse pattern generator (SAA8103) was added to achieve the improved electronic IMC. Then, the internal structure of the IMC pulse pattern generator was given. A dual pulse pattern generator drive circuit system was proposed. After computer simulation and indoor real shot verification, the compensation effect of the improved electronic IMC method was better than the compensation effect of the conventional electronic IMC method.

Synchronous Driving Method for Stitching Pixel Arrays Based on an Adaptive Correction Technique

Study on consistency driving method of stitching pixel array based on self-adaptive correction technique

A Reconfigurable Convolution-in-Pixel CMOS Image Sensor Architecture

Driving Techniques for High Frame Rate Ccd Camera

Systematic Experimental Study on Stitching Techniques of CMOS Image Sensors

Real-time Stereo Vision System Using Adaptive Weight Cost Aggregation Approach

Splicable random windowing row selection circuit for large array CMOS image sensor

An Improved Electronic Image Motion Compensation (IMC) Method of Aerial Full-Frame-Type Area Array CCD Camera Based on the CCD Multiphase Structure and Hardware Implementation

Study of Pixel and Driving Circuits of OLED on Silicon

A closed-loop, all-electronic pixel-wise adaptive imaging system for high dynamic range videography

A high consistency ramp circuit design method for negative feedback adaptive adjustment mechanism applied to large area array CMOS image sensors

Design and Implementation of a Flexible Interline CCD Pixel Binning Method

A Self-Synchronized High Speed Computational Ghost Imaging System: A Leap Towards Dynamic Capturing

A Real-Time Image Stitching and Fusion Algorithm Circuit Design Based on FPGA

Design Of A High Flexible Block-Based Computational Cmos Image Sensor

Self-synchronizing scheme for high speed computational ghost imaging

A Dual-Mode CMOS Image Sensor Based on In-Pixel Frame Differencing

Design of Electron Multiplication CCD Multi-Driving

Pixels Array Matching for Optical Readout Microcantilever Array Sensing System

Driver Design for a Digital Aerial Camera and Optimization

Development of 0.5 μm Pixel 3-Wafers Stacked CMOS Image Sensor with through Silicon Deep Contact and In-pixel Cu-Cu Bonding Process