Abstract:In this paper, the performance of the electronic conventional image motion compensation (IMC) method based on the time delay integration (TDI) mode was analyzed using the optical injection formula of charge coupled devices (CCDs). The result shows that the non-synchronous effect of charge packet transfer caused by line-by-line transfer during exposure makes the compensated image dissatisfying. Then an improved electronic IMC method based on the CCD multiphase structure was proposed. In this method, a series of proper driving clocks were applied to drive the charge packet to move electrode-by-electrode during the exposure time, which results in a minimum non-synchronous effect of charge packet transfer. The mismatch of velocity between charge packet transfer and image motion was decreased. The performance of the improved electronic IMC method was also analyzed using the optical injection formula. The modulation degrees of the two methods were compared. The average value of the modulation degree of the improved electronic IMC method was 47/96, greater than the conventional electronic IMC method, which was 1/3. To achieve the improved electronic IMC, the driver timing diagram of the improved electronic IMC method was proposed. This paper presented an improved hardware implementation method for the improved electronic IMC method. Based on the basic FTF4052M drive circuit system, an IMC pulse pattern generator that worked together with the main pulse pattern generator (SAA8103) was added to achieve the improved electronic IMC. Then, the internal structure of the IMC pulse pattern generator was given. A dual pulse pattern generator drive circuit system was proposed. After computer simulation and indoor real shot verification, the compensation effect of the improved electronic IMC method was better than the compensation effect of the conventional electronic IMC method.

Driver Design for a Digital Aerial Camera and Optimization

Auto-focus apparatus with digital signal processor

Driving Techniques for High Frame Rate Ccd Camera

Hardware Design of Embedded Video Surveillance System Based on DM642

Video Driver Development Based on V4L2

Design and Optimization for Microscope Autofocus Systems Based on the Analysis of Video Signals

Some Applications of Ccd Rapid-Changing-Frequency High Speed Videography System

A novel optical design for car-camera lenses

Design of Multi-Mode Compatible Image Acquisition System for HD Area Array CCD

Design of EMCCD-based Driver Circuit

Design of Electron Multiplication CCD Multi-Driving

An Improved Electronic Image Motion Compensation (IMC) Method of Aerial Full-Frame-Type Area Array CCD Camera Based on the CCD Multiphase Structure and Hardware Implementation

Design And Realization Of An Aec&Agc System For The Ccd Aerial Camera

The design of wavefront coded imaging system

Design of high-frame camera based on CMOS image sensor

Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

An improved image restoration method for the high definition panoramic camera system

WDM Driver Program for Digital Film Image Decoding Board According with DCI Specification

Design and implementation of CCD imaging system for directional polarimetric camera

Design of a Non-vacuum-cooling Compact Scientific CCD Camera

Design of a general scientific CCD simulation and test system