Abstract:Large format polymer extrusion-based additive manufacturing has been studied recently due to its capacity for high throughput, customizable bead size and geometry, and ability to manufacture large parts. Samples from three fiber-filled amorphous thermoplastic materials 3D printed using a Masterprint 3X machine from Ingersoll Machine Tools were studied, along with their neat counterparts. Characterization techniques included thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and thermo-mechanical analysis (TMA). TGA results showed that the fillers decreased the degradation temperature for most of the materials investigated, with a 30 °C decrease for polycarbonate (PC) and a 12 °C decrease for polyethylene terephthalate glycol (PETG). For all the materials used, heat capacity increases with increasing temperature. Moreover, results show that a highly conductive filler increases the heat capacity. In contrast, a material with a lower conductivity decreases the heat capacity indicated in the 15.2% and 2.54% increase for acrylonitrile butadiene styrene (ABS) and PC and a 27.68% decrease for PETG. The TMA data show that the printed bead exhibits directional properties consistent with an orthotropic material. Smaller strains and coefficient of thermal expansion (CTE) were measured along the bead direction and across the bead compared to the through bead thickness showing that fillers are predominantly oriented in the bead direction, which is consistent with the literature. CTE values through bead thickness and neat material are similar in magnitude, which corresponds to the CTE of the matrix material. The experimental results serve to characterize the effect of fiber filler on the part thermal strains in three principal directions and two-part locations during the extrusion and bead deposition of large-format polymer extrusion-based additive manufacturing technologies.

Determination of the nonlinear thermal expansion coefficient of an epoxy used as an expander and its effects over a Fabry-Perot cavity filled with a polymer

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

Molecular Dynamics Simulations of Mechanical Properties of Epoxy-Amine: Cross-linker Type and Degree of Conversion Effects

Tuning Epoxy Thermomechanics via Thermal Isomerization: A Route to Negative Coefficient of Thermal Expansion Materials.

Design and Modulation of Negative Thermal Expansion for Epoxy Polymers

Thermal Expansion of Composite System Epoxy Resin/Recycled Carbon Fibers

The temperature dependence of the coefficients of thermal expansion of phenolic resin

Thermal expansivity of polymer nanocomposites and applications

Modifying Thermal Expansion of Polymer Composites by Blending with a Negative Thermal Expansion Material

Effects of Fiber Orientation on the Coefficient of Thermal Expansion of Fiber-Filled Polymer Systems in Large Format Polymer Extrusion-Based Additive Manufacturing

The effect of fiber orientation on the thermal expansion coefficients of fiber-reinforced composites

Thermo-Mechanical and Thermo-Electric Properties of a Carbon-Based Epoxy Resin: An Experimental, Statistical, and Numerical Investigation

Investigation of mechanical properties and thermal expansion coefficient of epoxy composites modified with MXene nanofluids

Characterization of Thermal Expansion Coefficient of 3D Printing Polymeric Materials Using Fiber Bragg Grating Sensors

Coefficient of thermal expansion and compute of carbon fibre reinforced magnesium composites

Study Of Non-Contact Measurement Of The Thermal Expansion Coefficients Of Materials Based On Laser Feedback Interferometry

A method for predicting thermal expansion coefficients of carbon fiber/epoxy composites with void defects

Dynamic Mechanical Properties and Thermal Effect of an Epoxy Resin Composite, Encapsulation’s Element of a New Electronic Component

Influence of carbon nanotubes on thermal expansion coefficient and thermal buckling of polymer composite plates: experimental and numerical investigations

A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials

Measurement Of Thermal Expansion Coefficients Of Materials Based On Nd:Yvo4 Laser Feedback Systems