Abstract:A primary mode of failure of thin-film coatings is the mismatch in thermal expansion coefficients of the substrate and the coating, which results in accumulation of interfacial stresses and ultimately in film delamination. While much attention has been devoted to modulation of interfacial bonding to mitigate delamination, current strategies are constrained in their generalizability and have had limited success in imbuing resistance to prolonged thermal cycling. We demonstrate here the incorporation of rigid thermal expansion compensators within polymeric films as a generalizable strategy for minimizing thermal mismatch with the substrate. Nanostructures of the isotropic negative thermal expansion (NTE) material HfV2O7 have been prepared based on the reaction of nanoparticulate precursors. The NTE behavior, derived from transverse oxygen displacement within the cubic structure, has been examined using temperature-variant powder X-ray diffraction, Raman spectroscopy, electron microscopy, and selected-area electron diffraction measurements. HfV2O7 initially crystallizes in a 3 × 3 × 3 superlattice but undergoes phase transformations to stabilize a cubic structure that exhibits strong and isotropic NTE with a coefficient of thermal expansion (CTE) = −6.7 × 10–6 °C–1 across an extended temperature range of 130–700 °C. Incorporation of HfV2O7 in a high-temperature thermoset polybenzimidazole enables the reduction of compressive stress by 67.3% for a relatively small loading of 26.6 vol % HfV2O7. Based on a composite model, we demonstrate that HfV2O7 can reduce the thermal expansion coefficient of polymer nanocomposite films, even at low volume fractions, as a result of its substantially higher elastic modulus compared to the continuous polymer matrix. By changing the volume fraction of HfV2O7, the overall coefficients of thermal expansion of the film can be tuned to match a range of substrates, thereby mitigating thermal stresses and resolving a fundamental challenge for high-temperature composites and nanocomposite coatings.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10867.SEM-EDS mapping analysis on HfO2/VO2 ball-milled mixtures; XRD pattern of HfV2O7 synthesized from different HfO2; X-ray diffraction patterns of HfV2O7 synthesized from conventional solid-state method; Rietveld refinement of the HfV2O7 structure; and XRD patterns of HfV2O7 collected at 30, 50, 100, 150, and 200 °C (PDF)This article has not yet been cited by other publications.

Modifying Thermal Expansion of Polymer Composites by Blending with a Negative Thermal Expansion Material

Porous composite with negative thermal expansion obtained by photopolymer additive manufacturing

Thermal Expansion Behavior of Copper Matrix Composite Containing Negative Thermal Expansion PbTiO 3 Particles

Significant Enhancement of Mechanical and Thermal Properties of Thermoplastic Polyester Elastomer by Polymer Blending and Nanoinclusion

Fabrication of metal matrix composites with negative thermal expansion zinc pyrophosphate filler

Design and Modulation of Negative Thermal Expansion for Epoxy Polymers

Tuning Epoxy Thermomechanics via Thermal Isomerization: A Route to Negative Coefficient of Thermal Expansion Materials.

Ultra‐low loss polyphenylene oxide‐based composites with negative thermal expansion fillers

Negative Thermal Expansion HfV 2 O 7 Nanostructures for Alleviation of Thermal Stress in Nanocomposite Coatings

Construction of zirconium tungstate modified polymer bonded energetic composites with highly inhibited thermal expansion via bioinspired interfacial reinforcement

Effects of Fiber Orientation on the Coefficient of Thermal Expansion of Fiber-Filled Polymer Systems in Large Format Polymer Extrusion-Based Additive Manufacturing

Thermal expansivity of polymer nanocomposites and applications

Negative Thermal Expansion Design Strategies in a Diverse Series of Metal–Organic Frameworks

Synergistic effect of positive temperature coefficient and thermally conductive micro‐nano fillers on electrical and thermal properties of epoxy resin

Effect of addition of compatibilizer on mechanical, thermal and thermo-mechanical behavior of a polymer blend (PBT/ PBT(G)/ PTT) composite

Properties of polyphenylene sulphide/glass fibre composites with negative thermal expansion ceramic fillers

The Thermal Expansion of Polymer

High Temperature Thermosets With a Low Coefficient of Thermal Expansion

A Novel Polymer Composite with Double Positive‐temperature‐coefficient Transitions: Effect of Filler–matrix Interface on the Resistivity–temperature Behavior

Large negative thermal expansion of a polymer driven by a submolecular conformational change