Abstract:The conversion of plastic waste to high value-added aromatics such as benzene, toluene, ethylbenzene, xylene (BTEX) through catalytic pyrolysis offers huge untapped opportunities for resource recovery and plastic pollution control. Economical equipment configuration, operation and maintenance, high safety factor, high efficiency, stability, low-cost catalyst synthesis design, high yield, high selectivity of products are the key to the practical application of catalytic pyrolysis. In present study, low-cost kieselguhr based ZSM-5 was synthesized by one-pot in situ hydrothermal method using kieselguhr as silicon-aluminum source. During the depolymerization-recrystallization process, the selective growth and self-assembly of crystals on the a, c axis formed large-grain of ZSM-5 with extended straight channels and maximized sinusoidal channels. Native transition and alkaline-earth metals were coordinated to the acidic sites of the silica-aluminum skeleton, achieving tunability of the catalyst acidity. Catalytic pyrolysis of mask waste at 550 °C in a fixed bed reactor achieved the highest pyrolysis oil yield (44.3 wt%) and BTEX selectivity (77.1 %) with p -xylene as the dominant xylene product (78.2 %). After 3 cycles of long-life experiments, the BTEX selectivity of the catalyst remained at 65.1 %, which is higher than that of commercial ZSM-5 (54.9 %), indicating the superior use stability. Molecular dynamics simulations showed that the excellent shape-selectivity of the catalyst is based on its unique pore structure, which facilitates the diffusion and transport of appropriately sized intermediates/products within the structure, resulting in products with advantageous distributions. This study proposes an efficient and feasible plastic closed-loop strategy for green upgrading of medical waste to high value-added chemicals.

Low temperature upcycling of polyethylene to gasoline range chemicals: Hydrogen transfer and heat compensation to endothermic pyrolysis reaction over zeolites

Upcycling of polyethylene to gasoline through a self-supplied hydrogen strategy in a layered self-pillared zeolite

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Selective Hydrocracking of Waste Polyolefins Toward Gasoline-Range Liquid Fuels Via Tandem Catalysis over a Cerium-Promoted Pt/HY Catalyst

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Coking-Resistant Polyethylene Upcycling Modulated by Zeolite Micropore Diffusion.

Selective Upcycling of Polyethylene over Ru/H‐ZSM‐5 Bifunctional Catalyst into High‐Quality Liquid Fuel at Mild Conditions

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

Production of monocyclic aromatics and light olefins through ex-situ catalytic pyrolysis of low-density polyethylene over Ga/P/ZSM-5 catalyst

Polyethylene upcycling to aromatics by pulse pressurized catalytic pyrolysis

Efficient Pyrolysis of Low-Density Polyethylene for Regulatable Oil and Gas Products by ZSM-5, HY and MCM-41 Catalysts

Improvement of Aromatics Selectivity from Catalytic Pyrolysis of Low-Density Polyethylene with Metal-Modified HZSM-5 in a CO2 Atmosphere

Catalytic reforming of polyethylene pyrolysis vapors to naphtha range hydrocarbons with low aromatic content over a high silica ZSM-5 zeolite

Catalytic pyrolysis of waste polyethylene into benzene, toluene, ethylbenzene and xylene (BTEX)-enriched oil with dielectric barrier discharge reactor

Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Catalytic pyrolysis of plastic waste to gasoline, jet fuel and diesel with nano MOF derived-loaded Y zeolite: Evaluation of temperature, zeolite crystallization and catalyst loading effects

Highly Selective Upgrading of Polyethylene into Light Aromatics via a Low-Temperature Melting-Catalysis Strategy

Layered self-pillared zeolites convert polyethylene to gasoline

Selective Hydrogenolysis Conversion of Polyethylene into Alkyl Oil over Iridium-based Catalyst

Catalytic conversion of post-consumer recycled high-density polyethylene oil over Zn-impregnated ZSM-5 catalysts