Abstract:Ni-SiC nanocomposite coatings were prepared by means of the conventional electrocodeposition method.The technological parameters that make the nanocomposite coatings have a better corrosion resistance in 0.5 mol/L NaCl solution were preliminarily determined by using electrochemical impedance spectroscopy test（EIS）.By comparing the charge transfer resistance of the coatings,it is shown that coatings prepared with current density range of 15 mA/cm~2～20 mA/cm~2 and SiC content of 6 g/L have better corrosion resistance.The structure of coatings were investigated by scanning electron microscopy（SEM）.The corrosion resistance of Ni-SiC nanocomposite coatings and pure nickel coatings in 0.5 mol/L NaCl solution and 1 mol/L HNO_3 solution was analyzed by immersion tests,electrochemical impedance spectroscopy and polarization curves.As immersion time prolonged in 0.5 mol/L NaCl solution,the charge transfer resistance of Ni-SiC nanocomposite coatings and pure nickel coatings reduced rapidly at initial stage and then became stable at later stage.Moreover,the charge transfer resistance of Ni-SiC nanocomposite coatings were higher than those of pure nickel coatings at the most of the immersion time.In addition,the charge transfer resistance of coatings containing SiC particles were 2 to 5 times higher than those of coatings without SiC particles when they were immersed in 1 mol/L HNO_3 solution for 0.5 h.So the SiC nano-particles were helpful to improve the corrosion resistance of the coatings, which increased with increasing SiC content in the coatings.The effect of SiC nano-particles on the corrosion resistance was discussed in details.

Effect of Ni content on the corrosion behavior of Mo2NiB2–Ni cermet in H2SO4 solution

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Effect of Ni Doping on Electrocatalytic Hydrogen Evolution Activity of MoS2

Characterization and corrosion behavior of electroless Ni-Mo-P/Ni-P composite coating in CO2/H2S/Cl− brine: Effects of Mo addition and heat treatment

Microstructure, mechanical properties, and corrosion resistance of Mo2(Fe,Ni)B2-based cermets prepared by reaction boronizing sintering

Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries

CORROSION BEHAVIOR OF THE Ni-SiC NANOCOMPOSITE COATINGS

Effect of C content on the surface gradient structure of (Ti, Mo)(C, N) and Ti(C, N)-based cermets

Effect of chemical composition on the microstructure and mechanical properties of MoCoB based cermets

Effect of Mo content on the corrosion resistance of (CoCrFeNi)1−xMox thin films in sulfuric acid

Microstructure and Properties of Ti(C,N)-Based Cermets with AlxCoCrFeNiTi Binder

Effect of Mn addition on the microstructure, interface structure and mechanical properties of MoCoB–Co cermets prepared by in-situ synthesis

Synthesis and characterization of Mo@Ni core-shell composite powder-reinforced (W,Ti)C-based cermet

Evaluation of Corrosion Behaviour of Ni/Wc-Mos2 Composite Coatings Prepared by Jet Electrodeposition with Different Mos2 Doping Concentrations

Effect of Metallic Content on Mechanical Property of Ni/(10NiO-NiFe2O4) Cermets

Effect of Ni-MOF Derivatives on the Electrochemical Corrosion Behavior of Sn-0.7Cu Solders

Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments

Effect of Pre-Oxidation on the Electrochemical Corrosion Behavior of Ni-based Coating Reinforced by Ceramic Particles

Insight into the corrosion resistance of Mo-added NiCrBSi coating in simulated waste incineration environment

Effect of metastable phase content controlled by heat-treatment on corrosion behavior of directionally solidified Ni-12 wt%Si hypereutectic composites

Influence of Mo Concentration on the Structural and Electrochemical Properties of Double Doped Mo-Co-Ni3S2/NF Composites