Abstract:The corrosion of materials in sea environment are generally caused by salt spray, tidal action and adhesion of marine organisms. It is necessary to ensure the materials possess the required strength and good corrosion resistance during operation. Although the existing Ni-W-P electroless plating can provide a certain degree of corrosion protection, its corrosion resistance is still limited under harsh marine condition. SiO2 nanoparticles have received extensive concern due to their excellent corrosion resistance, which has been considered as potential candidates for enhancing corrosion resistance in multicomponent electroless coatings. In this study, the electroless Ni-W-P coatings with SiO2 nanoparticles co-deposition on the Q235 substrate was prepared. The coating was characterized through scanning electron microscopy (SEM), X-ray diffraction (XRD), polarization techniques, and electrochemical impedance spectroscopy (EIS). As a result, the Ni-W-P coating co-deposited with SiO2 nanoparticles demonstrates superior corrosion resistance compared to the pure Ni-W-P coating. The surface of SiO2 nanoparticles contain three distinct bonded hydroxyl functional groups, which can influence the ionic reaction in the plating solution and the deposition of elements in the coating. After modified by PVA, it can be uniformly dispersed in the coating, and the composite coating with SiO2 nanoparticles co-deposited is transformed into a nanocrystalline structure. The even distribution of SiO2 nanoparticles fill the defects within the coating, leading to a reduction in porosity, permeability, and susceptibility to penetration of corrosive media. Concurrently, the nanoparticles facilitate surface passivation, forming a stable interface with substrate and coating that inhibits electrochemical reactions and diminishes the rate of self-corrosion reactions. The good and stable corrosion resistance is achieved at the SiO2 concentration of 9 g/L and PVA concentration of 1.08 g/L. These findings offer valuable insights for addressing corrosion challenges in the field of marine engineering.

Evaluation of Corrosion Behaviour of Ni/Wc-Mos2 Composite Coatings Prepared by Jet Electrodeposition with Different Mos2 Doping Concentrations

Superhydrophobic and anticorrosion Ni-B/WC@MoS 2 composite coatings deposited via jet electrodeposition assisted with ultrasonics

Preparation of Ni–B composite coating doped with hydrothermally modified synthetic WC@MoS2 powders via ultrasonic-assisted jet electrodeposition for corrosion protection

Characterization and corrosion behavior of electroless Ni-Mo-P/Ni-P composite coating in CO2/H2S/Cl− brine: Effects of Mo addition and heat treatment

Fabrication of superhydrophobic self-cleaning Ni-Co-MoS 2 /Ni composite coating

Preparation of Chromium Carbide-Strengthened Ni-W Coatings by Electrodeposition and the Corresponding Anticorrosion Behavior in CO2-Saturated NaCl Solution

Microstructure, Friction, And Wear Properties Of Ni-Al2o3-Mos2 Composite Coatings

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Microstructure and Tribocorrosion Properties of Ni-Based Composite Coatings in Artificial Seawater

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

The Effect of Mos2 Content on the Protective Performance of Ni-Mos2 Composite Coatings Against Hydrogen Embrittlement in High Strength Steel

Study on the Corrosion Resistance of Superhydrophobic Ni-Co- P-BN(h) Nanocomposite Coatings Prepared by Electrochemical Machining and Fluorosilane Modification

CORROSION BEHAVIOR OF THE Ni-SiC NANOCOMPOSITE COATINGS

Corrosion Resistance of Electrodeposited Ni-Mo-W Coatings

Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel

Corrosion Performance of Nanocomposite Coatings in Moist SO2 Environment

Electrodeposition and Corrosion Analysis of Ni-Mo Alloy Coatings

Investigation on corrosion resistance of electroless Ni-W-P coatings co-deposited with SiO2 nanoparticles

Characterization and Wear Behaviors of Electrodeposited Ni-MoS2/SiC Composite Coating

One-step preparation of high performance Ni-MoS2 self-lubricating coatings via jet electrodeposition on additive manufactured aluminum alloy

Comparative study on the wear resistance and corrosion resistance of NiW and NiCoW composite coatings with micro- and nano-SiC particles