Abstract:Abstract To address the escalating demand for anti-corrosive and anti-fouling solutions in marine environments, the development of superhydrophobic bilayer coating based on nanocomposite polymers applied to metal substrates is crucial. However, achieving concurrent anti-corrosive and anti-fouling functionalities remains a formidable challenge. In this study, a nanocomposite polymer coating was created through the star crosslinking of polyhedral oligomeric silsesquioxane (POSS) and fluorinated polyimide (FPI) prepolymer. Subsequently, a double-layer coating featuring a superhydrophobic layer was fashioned using the aforementioned coating as the base layer. Following a 50-day salt spray test, both the FPI/POSS-4 coating and the double-layer superhydrophobic FPI/POSS@POA/F-SiO2 coating demonstrated exemplary corrosion resistance. The impedance modulus (|Z| 0.01 Hz) of FPI/POSS-4 and FPI/POSS@POA/F-SiO2 was 3.17 × 109 and 7.04 × 1010 Ω⋅cm2, respectively, surpassing that of pure FPI coating by approximately two to three orders of magnitude. The enhanced performance for the FPI/POSS-4 single-layer coating resulted from the POSS star crosslinking, which bolstered coating compactness, thereby creating a physical barrier akin to the “labyrinth effect.” This hindered corrosive media penetration, thereby extending the penetration path. Conversely, the latter double-layer coating relied on the exceptional shielding provided by the underlying nanocomposite polymer coating and the inhibitory effects of the superhydrophobic coating against corrosive media. Notably, the fabricated superhydrophobic coating exhibited robust mechanical durability, retaining its superhydrophobicity even after 100 cycles of sandpaper friction and 80 cycles of tape peeling. In addition, the superhydrophobic coating demonstrated self-cleaning and anti-fouling properties. This study offers a fresh perspective on the preparation of double-layer superhydrophobic coatings with outstanding anti-corrosive and anti-fouling attributes, showcasing their potential and prospective practical applications.

Fabrication of superhydrophobic self-cleaning Ni-Co-MoS 2 /Ni composite coating

Percolation-dominated Superhydrophobicity and Conductivity for Nanocomposite Coatings from the Mixtures of a Commercial Aqueous Silica Sol and Functionalized Carbon Nanotubes

Robust Ni/WC superhydrophobic surfaces by electrodeposition

Design and fabrication of a stable Ni-PTFE-SiC superhydrophobic anticorrosive coating by electrodeposition

Superhydrophobic and anticorrosion Ni-B/WC@MoS 2 composite coatings deposited via jet electrodeposition assisted with ultrasonics

Designing a Robust Ni-P/CeO2 Superhydrophobic Composite Coating for Synergistically Enhanced Corrosion Protection and Friction Reduction Performance

Multifunctional and fluorine-free superhydrophobic composite coating based on PDMS modified MWCNTs/ZnO with self-cleaning, oil-water separation, and flame retardant properties

Silica nanoparticles enhanced polysiloxane-modified nickel-based coatings on Mg alloy for robust superhydrophobicity and high corrosion resistance

The Preparation and Properties of a Ni-SiO2 Superamphiphobic Coating Obtained by Electrodeposition

Double-Layer Superhydrophobic Coating: Enhanced Anti-Corrosion and Anti-Fouling Resistance through Star Cross-linking of FPI/POSS@POA/F-SiO 2

Preparation of Ni–B composite coating doped with hydrothermally modified synthetic WC@MoS2 powders via ultrasonic-assisted jet electrodeposition for corrosion protection

Superhydrophobic epoxy resin coating with composite nanostructures for metal protection

Study on the Corrosion Resistance of Superhydrophobic Ni-Co- P-BN(h) Nanocomposite Coatings Prepared by Electrochemical Machining and Fluorosilane Modification

Superhydrophobic Ni nanocone surface prepared by electrodeposition and its overall performance

Corrosion resistance of superhydrophobic Ni-B/TiC composite coatings prepared by electroless deposition

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Preparation and Self-Cleaning Properties of a Superhydrophobic Composite Coating on a Stainless Steel Substrate

A Composite Super-Hydrophobic Coating on M2052 Alloy Exhibiting Corrosion Resistance in the Marine Environment

Preparation of a superhydrophobic Ni/SH-SiO 2 coating by one-step electrodeposition and an analysis of its anti-corrosion performance

One-step preparation of high performance Ni-MoS2 self-lubricating coatings via jet electrodeposition on additive manufactured aluminum alloy

Enhanced mechanical and wear properties of Ni-W-SiC composite coatings by synergistic influence of micro-nano SiC mixture