Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Preparation of a superhydrophobic Ni/SH-SiO 2 coating by one-step electrodeposition and an analysis of its anti-corrosion performance

The Preparation and Properties of a Ni-SiO2 Superamphiphobic Coating Obtained by Electrodeposition

Long-Term Durability of Robust Super-Hydrophobic Co–Ni-Based Coatings Produced by Electrochemical Deposition

Design and fabrication of a stable Ni-PTFE-SiC superhydrophobic anticorrosive coating by electrodeposition

The preparation and corrosion resistance of superhydrophobic coating on Cu plate via two-step electrodeposition

Study on superhydrophobicity and excellent corrosion resistance of a novel Ni‐SiC nanocomposite coating

Robust Ni/WC superhydrophobic surfaces by electrodeposition

Designing a Robust Ni-P/CeO2 Superhydrophobic Composite Coating for Synergistically Enhanced Corrosion Protection and Friction Reduction Performance

Superhydrophobic Ni nanocone surface prepared by electrodeposition and its overall performance

Study on the Corrosion Resistance of Superhydrophobic Ni-Co- P-BN(h) Nanocomposite Coatings Prepared by Electrochemical Machining and Fluorosilane Modification

Corrosion resistance of superhydrophobic Ni-B/TiC composite coatings prepared by electroless deposition

Facile preparation of a robust superhydrophobic SiO2/epoxy composite coating with favorable corrosion and scale inhibition performance

Preparation of durable, self-cleaning and photocatalytic superhydrophobic Ni3S2 coating on 304 stainless steel surface against contaminations

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Silica nanoparticles enhanced polysiloxane-modified nickel-based coatings on Mg alloy for robust superhydrophobicity and high corrosion resistance

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Fabrication of superhydrophobic self-cleaning Ni-Co-MoS 2 /Ni composite coating

Achieving hierarchical structure with superhydrophobicity and enhanced anti-corrosion via electrochemical etching and chemical vapor deposition

Fabrication of a Robust Superhydrophobic Ni Coating with Micro–Nano Dual‐Scale Structures on 316L Stainless Steel

HD-SiO2/SiO2 Sol@PDMS Superhydrophobic Coating with Good Durability and Anti-Corrosion for Protection of Al Sheets

A Comparative Study on the Corrosion Resistance and Long-Term Stability of Hierarchical Superhydrophobic Nickel Coatings Obtained by One-Step and Two-Step Electrodeposition Processes