Abstract:In the present work, a novel poly(arylene ether ketone) with a unique molecular design that included concentrated flexible sulfoalkyl groups and a silane cross-linked network (C-SPAEK) was prepared and used as a PEM for DMFCs. The chemical structures, sulfonation degree and phase-separated morphology were characterized and identified by 1 H NMR, FT-IR and SAXS. The resulting copolymers exhibited excellent thermal stability (T 5% >263.8 °C) and mechanical properties (tensile strength>52.88 MPa). Additionally, the high IEC values and obvious hydrophilic/hydrophobic phase-separated structure (d > 2.71 nm) ensured that the C-SPAEK membranes possessed high proton conductivities . The C-SPAEK PEMs also displayed enhanced methanol resistance and dimensional stability, which were much better than those of a recast Nafion membrane under the same conditions. The C-SPAEK-0.4 membrane maintained a low methanol absorption of less than 48.7%, even in 4 M methanol solution. In particular, the C-SPAEK-0.6 membrane exhibited the best comprehensive performance, with a high proton conductivity (0.164 S cm −1 ), low methanol uptake (52.1%) and permeability (3.63 × 10 −7 cm 2 s −1 ), and maximum power density (83.2 mW cm −2 ), when immersed in 2 M methanol at 80 °C in a DMFC single-cell. These results suggested that the C-SPAEK membranes were sufficiently tough and had the potential to overcome the problems caused by the high methanol permeability of PEMs. The unique molecular design of C-SPAEK guaranteed a rare combination of high proton conductivity and enhanced methanol resistance, which are the key determining factors for DMFC applications.

Construction of a new continuous proton transport channel through a covalent crosslinking reaction between carboxyl and amino groups

Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Covalently and ionically crosslinked sulfonated poly(arylene ether ketone)s as proton exchange membranes

Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications

Synthesis and crosslinking of hydroxyl-functionalized sulfonated poly(ether ether ketone) copolymer as candidates for proton exchange membranes

Construction of proton transport channels in cross-linked composite membrane with highly sulfonated SPEEK nanofibers

Preparation and Properties of Novel Cross-Linked Sulfonated Poly(arylene Ether Ketone) for Direct Methanol Fuel Cell Application

A facile, effective thermal crosslinking to balance stability and proton conduction for proton exchange membranes based on blend sulfonated poly(ether ether ketone)/sulfonated poly(arylene ether sulfone)

A novel cross-linked anion exchange membrane with conjugated and non-conjugated pyridine groups

Cross-linked tri-side chains poly(arylene ether ketone)s containing pendant alkylsulfonic acid groups for proton exchange membranes

Design, transport efficiency and structure-activity relationship of sulfonated poly (aryl ether ketone) proton exchange membrane based on multi-functional MOFs

Carboxyl-terminated benzimidazole-assisted cross-linked sulfonated poly(ether ether ketone)s for highly conductive PEM with low water uptake and methanol permeability

Cross-linked polyelectrolyte for direct methanol fuel cells applications based on a novel sulfonated cross-linker

Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6-dimethyl-1,4-phenylene oxide)

Effective proton transport and anti-free radical oxidation: construction of interpenetrating network via co-crosslinking polybenzimidazole with proton conductors

A Facile Approach to Prepare Self-Cross-Linkable Sulfonated Poly(Ether Ether Ketone) Membranes for Direct Methanol Fuel Cells

Considerations of the morphology in the design of proton exchange membranes: Cross-linked sulfonated poly(ether ether ketone)s using a new carboxyl-terminated benzimidazole as the cross-linker for PEMFCs

A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells

Silane cross-linked network and concentrated flexible sulfoalkyl groups for forming a novel C-SPAEK membrane with enhanced methanol resistance and proton conductivity for DMFC applications