Abstract:A novel series of sulfonated poly(ether ether ketone ketone)s (SPEEKKs) with different degrees of sulfonation (Ds) were synthesized from 1,3-bis(3-sodium sulfonate-4-fluorobenzoyl)benzene (1,3-SFBB-Na), 1,3-bis(4-fluorobenzoyl)benzene (1,3-FBB) and 3,3′,5,5′-tetramethyl-4,4′-biphenol (TMBP) by aromatic nucleophilic polycondensation. The chemical structures of SPEEKKs were confirmed by FT-IR spectroscopy and the Ds values of the polymers were calculated by 1H NMR and titration methods, respectively. The thermal stabilities of the SPEEKKs in acid and sodium forms were characterized by thermogravimetric analysis (TGA), which showed that SPEEKKs had excellent thermal properties at high temperatures. All the SPEEKK polymers were easily solution cast into tough membranes. Water uptakes, proton conductivities and methanol diffusion coefficients of the SPEEKK membranes were measured. Water uptake increased with Ds and temperature. Compared to Nafion, the SPEEKK-60, -70 and -80 membranes showed higher proton conductivities at 80°C, while the other SPEEKK membranes showed relatively lower proton conductivities. This may be due to the different distribution of ion-conducting domains in membrane. However, these membranes showed lower methanol diffusions in the range of 8.32×10−9 to 1.14×10−7cm2s−1 compared with that of Nafion (2×10−6cm2s−1) at the same temperature. The membranes also showed excellent mechanical properties (with a Young's modulus>1GPa and a tensile strength>40MPa). These results indicate that the SPEEKK membranes are promising materials for use in direct methanol fuel cell (DMFC) applications.

Preparation and Properties of Novel Cross-Linked Sulfonated Poly(arylene Ether Ketone) for Direct Methanol Fuel Cell Application

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications

Cross-linked Sulfonated Poly(arylene Ether Nitrile)s Membranes Based on Macromolecule Cross-Linker for Direct Methanol Fuel Cell Application

Nafion-assisted Cross-Linking of Sulfonated Poly(arylene Ether Ketone) Bearing Carboxylic Acid Groups and Their Composite Membranes for Fuel Cells

Novel covalent-ionically cross-linked membranes with extremely low water swelling and methanol crossover for direct methanol fuel cell applications

Novel hybrid polymer electrolyte membranes prepared by a silane-cross-linking technique for direct methanol fuel cells

Novel cross-linked membrane for direct methanol fuel cell application: sulfonated poly(ether ether nitrile)s

Novel side-chain-type sulfonated poly(arylene ether ketone) with pendant sulfoalkyl groups for direct methanol fuel cells

Preparation and properties of bisphenol A-based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

Phthalonitrile-terminated Sulfonated Poly(arylene Ether Nitrile)s for Direct Methanol Fuel Cells (dmfcs) Application

Cross-linked polyelectrolyte for direct methanol fuel cells applications based on a novel sulfonated cross-linker

Cross-Linked Membranes With A Macromolecular Cross-Linker For Direct Methanol Fuel Cells

Benzimidazole-Cross-Linked Proton Exchange Membranes for Direct Methanol Fuel Cells

Chemically stable thioether cross-linked membranes derived from sulfonated poly(arylene ether ketone)s for direct methanol fuel cells

A Facile Approach to Prepare Self-Cross-Linkable Sulfonated Poly(Ether Ether Ketone) Membranes for Direct Methanol Fuel Cells

Design of a stable and methanol resistant membrane with cross-linked multilayered polyelectrolyte complexes for direct methanol fuel cells

Preparation and Properties of Crosslinked Hybrid Proton Exchange Membrane Based on Sulfonated Poly (arylene Ether Nitrile) with Improved Selectivity for Fuel Cell Application

Dually Cross-Linked Polymer Electrolyte Membranes for Direct Methanol Fuel Cells

Cross-linked Hydroxide Conductive Membranes with Side Chains for Direct Methanol Fuel Cell Applications

Novel Sulfonated Poly(ether Ether Ketone Ketone)s for Direct Methanol Fuel Cells Usage: Synthesis, Water Uptake, Methanol Diffusion Coefficient and Proton Conductivity