Abstract:The preparation of composite proton exchange membranes (PEMs) by incorporating metal- organic frameworks (MOFs) into polymeric substrates has become a hot research topic in the field of fuel cells in recent years. In this work, ZSC was prepared by in-suit reacted with the precursor of ZIF-8 (Zeolitic Imidazolate Framework 8) and silica coated carbon nanotubes (SiO2@CNTs). The as-prepared ZSC was introduced into sulfonated poly (ether ether ketone) (SPEEK) to fabricate a series of composite proton exchange membranes SPEEK/ZSC-x (where x is the mass percentage between ZSC and SPEEK). The coating treatment of carbon nanotubes (CNTs) by silica not only can avoid the direct contacting among CNTs and enhance the dispersion in SPEEK matrix, but also realize the regulation of nucleation and crystallization process of ZIF-8 particles along the morphology of CNTs. The obtained SPEEK/ZSC composite membranes show improved performance owing to construction of interconnected network architecture and the compositional advantages of the ZSC materials. The proton conductivity of SPEEK/ZSC-0.5 membrane was up to 38.10 mS/cm at 80 °C, which was 1.8 times that of the pure SPEEK membrane (21.12 mS/cm) under the same condition. Moreover, the SPEEK/ZSC-0.5 showed better performance with peak power density of 38.9 mW/cm2 in 2 M methanol solution, which was 1.3 times that of the pure SPEEK membrane of 30.3 mW/cm2, the further stability tests confirmed that the composite film maintained good voltage stability even after 100 h of continuous operation at 80 °C. These results indicate that the strategy of construction MOFs and functional CNTs hybrid materials show promising application prospects in the preparation of high performance PEMs.

Carboxyl-terminated benzimidazole-assisted cross-linked sulfonated poly(ether ether ketone)s for highly conductive PEM with low water uptake and methanol permeability

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Considerations of the morphology in the design of proton exchange membranes: Cross-linked sulfonated poly(ether ether ketone)s using a new carboxyl-terminated benzimidazole as the cross-linker for PEMFCs

Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550

Enhanced properties of sulfonated polyether ether ketone proton exchange membrane by incorporating carboxylic-contained zeolitic imidazolate frameworks

Proton-conducting membranes based on benzimidazole-containing sulfonated poly(ether ether ketone) compared with their carboxyl acid form

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Synthesis and crosslinking of hydroxyl-functionalized sulfonated poly(ether ether ketone) copolymer as candidates for proton exchange membranes

Proton-conducting membranes based on side-chain-type sulfonated poly(ether ketone/ether benzimidazole)s via one-pot condensation

Novel Sulfonated Poly(Ether Ether Ketone) with Pendant Benzimidazole Groups As A Proton Exchange Membrane for Direct Methanol Fuel Cells

Highly Proton Conductive and Mechanically Robust SPEEK Composite Membranes Incorporated with Hierarchical Metal–organic Framework/carbon Nanotubes Compound

A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells

Cross-linked polyelectrolyte for direct methanol fuel cells applications based on a novel sulfonated cross-linker

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

A Facile Approach to Prepare Self-Cross-Linkable Sulfonated Poly(Ether Ether Ketone) Membranes for Direct Methanol Fuel Cells

Sulfonated Poly(ether Ether Ketone)/polybenzimidazole Oligomer/epoxy Resin Composite Membranes in Situ Polymerization for Direct Methanol Fuel Cell Usages

Covalently and ionically crosslinked sulfonated poly(arylene ether ketone)s as proton exchange membranes

Poly(ether Ketone)s Bearing Pendent Sulfonate Groups Via Copolyacylation of a Sulfonated Monomer and Isomeric AB‐type Comonomers