Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Predictions of Line Chilldown Boiling Regime Transitions by a Coupled CFD-Subgrid Boiling Model Validated against 1G LN2 Experiments

CFD Simulations and Experimental Verification on Nucleate Pool Boiling of Liquid Nitrogen

Simulations of Cryogenic Line Chilldown with Advanced Subgrid Wall Boiling Models

Transient modeling of cryogenic two-phase flow boiling during chill-down process

Numerical Modeling of the Transient Chilldown of a Cryogenic Propellant Transfer Line

Numerical modeling of flow film boiling in cryogenic chilldown process using the AIAD framework

Experimental investigation on chill-down process of cryogenic flow line

Development of constitutive relations for predicting film boiling crisis in bare and inner wall coated cryogenic tubes with a low-thermal conductive layer for heat transfer enhancement

Investigation of quench flow boiling heat transfer correlations for liquid oxygen feed line chill-down with outlet contraction

Experimental research and numerical simulation on cryogenic line chill-down process

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Investigation on heat transfer in line chill-down process with various cryogenic fluids

Population Balance Modelling for Subcooled Boiling Flow of Liquid Nitrogen in A Vertical Tube

Modelling and Numerical Simulation of Boiling Flow of Liquid Nitrogen in Vertical Tube

Cryogenic Boiling and Two-Phase Flow during Pipe Chilldown in Earth and Reduced Gravity

An experimental study on liquid nitrogen pipe chilldown and heat transfer with pulse flows

CFD Study on Film Boiling Features of Cryogenic Fluid Influenced by Heat Structures and Gravity Levels

Experimental Investigation on Cryogenic Line Chill-Down Process by Using Liquid Nitrogen

CFD simulation of upward subcooled boiling flow of refrigerant-113 using the two-fluid model

Numerical modeling of cryogenic chilldown process in terrestrial gravity and microgravity