Abstract:Cryogenic feed lines used for ground-based liquid transfer, thermal management in space flight, as well as the one with an injector at the outlet used for supplying propellants to the cryogenic engine combustion chamber, undergo an initial transient cool-down operation before vapor free liquid supply can be established through them. Accurate prediction of the thermal and hydraulic transients during this period has critical importance in the safe operation and efficient utilization of the cryogen. In the present work, a one-dimensional non-homogeneous two-phase model is used for simulating the chill-down operation in feed lines with and without outlet contraction. For transport feed lines without outlet constriction, the obtained transient wall temperature profiles indicate good prediction when the heat transfer correlations proposed based on recent chill-down experiments are employed as constitutive relations. Subsequently, the numerical model is applied for predicting the wall temperature transients during outlet contracted LOX feed line chill-down. It was noted that built-in heat transfer correlations in thermal-hydraulic code SINDA/FLUINT need revision, especially for rewetting point and heat transfer correlation during post rewetting regimes, for accurate thermal transient predictions during end constrained feed line chill-down. Hence, recent chill-down correlations reported in the literature and the correlations employed in previous chill-down numerical models are tested for their applicability. The recent cryogenic chill-down correlations reported in the literature performed well when applied within the correlation range. However, these correlations over predict the heat transfer at a very high mass flux (order of 3412 kg/m2-s). Hence, modified correlations are proposed for film and nucleate boiling heat transfer coefficients and rewetting temperature.

Numerical Modeling of the Transient Chilldown of a Cryogenic Propellant Transfer Line

Liquid hydrogen line chilldown experiments at high Reynolds Numbers. Optimal chilldown methods

Simulations of Cryogenic Line Chilldown with Advanced Subgrid Wall Boiling Models

Transient modeling of cryogenic two-phase flow boiling during chill-down process

Simulation Test of Natural Circulation Precooling for Cryogenic Pump System

Predictions of Line Chilldown Boiling Regime Transitions by a Coupled CFD-Subgrid Boiling Model Validated against 1G LN2 Experiments

Numerical modeling of cryogenic chilldown process in terrestrial gravity and microgravity

Nitrogen flow boiling and chilldown experiments in microgravity using pulse flow and low-thermally conductive coatings

Dynamic Thermal Performance of Cryogenic Liquid Hydrogen Heating from Gas-Liquid Stratification to Supercritical under a Constant Heat Flux Condition: A Two-Step Simulation

The effect of gravity on cryogenic transfer line chilldown performance using pulse flow and low thermally conductive coatings

Modeling and Simulation of Cryogenic Propellant Tank Pressurization in Normal Gravity

Experimental research and numerical simulation on cryogenic line chill-down process

Numerical investigation on hydrodynamic characteristics of two-phase flow with liquid hydrogen through cryogenic feed lines at terrestrial and microgravity

A Direct Numerical Simulation of Axisymmetric Cryogenic Chill Down in a Pipe in Microgravity

Investigation on heat transfer in line chill-down process with various cryogenic fluids

Liquid hydrogen pipeline chill-down: Mathematical modelling and investigation

An experimental study on terrestrial cryogenic tube chilldown II. Effect of flow direction with respect to gravity and new correlation set

Comparison of cryogenic flow boiling in liquid nitrogen and liquid hydrogen chilldown experiments

Two-Phase Flow and Heat Transfer During Chilldown of a Simulated Flexible Metal Hose Using Liquid Nitrogen

Investigation of quench flow boiling heat transfer correlations for liquid oxygen feed line chill-down with outlet contraction