Abstract:The key objective of the presented study was to use a commercially feasible and scalable approach to modifying surfaces to reduce friction. In an industrial setting, surface grinding is commercially viable and scalable as compared to other surface modifying processes like laser surface texturing, plasma, or ion beam milling. Frictional force plots are generated from the lubricated contact interface between a flat-faced aluminum pin and a reciprocating stainless steel countersurface driven by a scotch yoke follower mechanism. Using a surface grinder and selecting coated abrasive sheets, different stainless steel surface specimens, classified as P320, P1200, and mirror were prepared and tested in this study. The frictional force encountered by the pin was recorded using a data acquisition system at discrete intervals in the reciprocating path and averaged along the sliding cycles. The shape of the frictional force plots thus generated were found to be different from each other. Various mechanisms of friction prevalent at the contact were presumed to influence the shape of these frictional plots. These mechanisms were tested by varying the sliding speeds, lubricating oil viscosities, and using tribofilm-forming additives. We used Group 1 base oil of two different viscosities in our tests. At lower speeds, the frictional force plot for the mirror-finished surface seemed to conform to the Stribeck curve, while in the same scale of reference, the P1200 surface had a force plot that was nearly flat and of very low magnitude. At the contact interface, there seemed to be a fine balance existing between adhesion and abrasion phenomena, while oil retention was promoted to achieve extremely low sliding friction.

Effect of surface modification on friction characteristics of sliding bearings: A review

Study on Friction Characteristics of Sliding Interface of Feed System

The Influence of Surface Topography on Friction Squeal-a Review

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

Effects of Texture Slip Surface on Tribological Performances of Slider Bearing

Lubrication Performance of a Novel Double-Film Bearing: Theory & Experiment

Effect of surface roughness on sliding friction in lubricated contacts-reciprocal experiment study

Research Progress on the Design of Surface Texture in Tribological Applications: A Mini-Review

Low friction of superslippery and superlubricity: A review

The Effect of Surface Texturing on Reducing the Friction and Wear of Steel under Lubricated Sliding Contact

Experimental Study and Simulation Analysis on Friction Behavior of A Mechanical Surface Sliding on Hard Particles

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Research progress of improving surface friction properties by surface texture technology

Research Progress of Surface Micro-texture Combined with Solid Lubricants on Tribological Properties

EFFECTS OF LARGE-AREA TEXTURED/SLIP SURFACE ON SLIDER BEARING

Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding

Friction Behavior of a Textured Surface against Several Materials under Dry and Lubricated Conditions

A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing

Tailored surface textures to increase friction—A review

Effect and performance analysis of different surface treatments on polymer-metal friction pairs