Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The variable-speed scroll compressors can adapt to the various demands of heating and cooling capacity, and the rotational speeds significantly influence the rotor dynamic and bearings lubrication, which might cause performance and reliability issues. In this paper, numerical models for the rotor-bearing-frame system are developed by coupling the Reynolds equation, rotor dynamic equation, and the flexibility equation of the frame. The experimental apparatus is also established to directly measure the journal displacement response in the hermetic high-pressure shell of the compressor. The predicted journal center trajectories are compared with the experimental results and they show good agreement. Results show that the whirl radius decreases with the increase of rotational speed at the measuring point, while the opposite tendency can be observed at the bottom of the main bearing. Transient dynamic analysis of the rotor shows that the tilting and deformation of the rotor vary with respect to different rotational speeds. The displacement of the crank part could lead to the separating tendency between orbiting and fixed scrolls through the coupled orbiting bearing, especially at the lower rotational speed, due to the pull of main balance weight. The numerical results also reveal that the distribution of oil film pressure is dominated by the squeeze effect due to the relatively stable magnitude but the variable direction of loads on the shaft. The influence of the deformation of the cantilevered bearing frame on the oil film thickness is significant but the maximum deformation moves downward at the higher rotational speed.

Bending and torsional coupling study of rolling-piston compressor valves

Finite element analysis and experimental study of spiral flexure spring

Modeling and Performance Analysis of Rotary Compressor Considering Multi-Body Coupling and Bearing Deformation

Finite element analysis and topology optimization of direct-drive compressor valve

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Modeling the valve dynamics in a reciprocating compressor based on two-dimensional computational fluid dynamic numerical simulation

Numerical analysis of vane–slot friction pair in a rolling piston compressor considering deformation and groove design

Theoretical Model Development and Mixed Lubrication Analyses of Rolling Piston Type Rotary Compressors: A Review

Performance Simulation Analysis of a Novel Dual-piston Two-Stage Carbon Dioxide Linear Compressor

TRANSIENT SIMULATION ON UNBALANCED TORQUE OF PISTON TYPE VALVE CORES DURING DYNAMIC MOTION

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

Dynamic modeling and characteristics analysis of sliding vane in a high-speed rotary compressor considering groove distribution and multi-body coupling

The coupled bending-torsional dynamic behavior in the rotating machinery: modeling, simulation and experiment validation

Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder

Experimental and numerical study on the dynamic and lubrication characteristics of the rotor-bearing-frame system in a variable-speed scroll compressor

Numerical Simulation for Flow of Rolling Piston Type of Rotary Compressor

Dynamic Model and Numerical Simulation for Synchronal Rotary Compressor

Geometric model and pressurization analysis on a novel sliding vane compressor with an asymmetrical cylinder profile

Numerical Analyses of Hydrodynamic Lubrication and Dynamics of the Rolling Piston and Crankshaft in a Rotary Compressor

A coupling vibration model of multi-stage pump rotor system based on FEM

Study on the torsional movement of a reed valve in a rotary compressor