Abstract:Generally, the function of thermal interface material (TIM) is filling rough surfaces, eradicating air pockets, decreasing thermal resistance, and improving heat dissipating effects. On this basis, we provide the TIM with another identity, "adhesion", rendering it not only play a role of heat dissipation, but also serve as an adhesive to bond contacting surfaces. In this work, nano- to microscopic liquid metal (LM) droplets are embedded into the epoxy matrix to fabricate a LM-epoxy in-situ cured composite. By adding the curing agent, the LM-epoxy composite is cured into an entity structure, transforming from an amorphous grease state to a self-adaptive pad state. When the average droplet size is in a reasonable range of approximately 5–25 μm, the composite's thermal resistance ( R total ) decreases to 2.19 mm 2 K/W at 70% volume fraction with its adhesive strength of 0.497 MPa, and the thermal conductivity ( k TIM ) could increase to 10.05 W/(m·K) at 85%. Both R total and k TIM change rapidly for droplet size approximately ranging from 10 2 nm to 10 1 μm and then tend to level off when it further increases to 10 2 μm. A conception of equivalent contact thickness, δ, is presented to elucidate the contacting thermal resistance R c , and set up predictive models of R total for different volume fractions by considering the microscopic interfacial thermal resistance R b between filler and matrix or not. This composite simultaneously possesses characteristics of the low thermal resistance like thermal grease, the whole entity like thermal pad, and the anti-leak characteristics by in-situ cured process. Actual cooling tests show it has a considerable temperature difference of 4.75 °C lower than the commercial thermal grease at 650 W heating power. This in-situ cured strategy, via decreasing the thermal resistance and solving the problem of LM leakage, remarkably promotes the LM-TIMs achieving a broader application prospect in the future.

A thermally conductive interface material with tremendous and reversible surface adhesion promises durable cross-interface heat conduction

Robust, Self‐Healing, and Multi‐Use Poly(Urethane‐Urea‐Imide) Elastomer as a Durable Adhesive for Thermal Interface Materials

Balancing Interfacial Toughness and Intrinsic Dissipation for High Adhesion and Thermal Conductivity of Polymer-Based Thermal Interface Materials

Multiway Softness Polyurethane Elastomeric Composite with Enhanced Thermal Conductivity and Application as Thermal Interface Materials

Design of Thermal Interface Materials with Excellent Interfacial Heat/Force Transfer Ability via Hierarchical Energy Dissipation

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Composite Materials: Functional Soft Composites As Thermal Protecting Substrates for Wearable Electronics (adv. Funct. Mater. 45/2019)

Joint‐Inspired Liquid and Thermal Conductive Interface for Designing Thermal Interface Materials with High Solid Filling yet Excellent Thixotropy (Adv. Funct. Mater. 14/2023)

Temperature adjustable thermal conductivity and thermal contact resistance for liquid metal/paraffin/olefin block copolymer interface material

Diamond-Reinforced Al(H2PO4)3@Epoxy Hybrid Thermal Adhesive With Ultra-High Thermal Conductivity and Bonding Strength

Temperature-dependent Adhesive Polymer-Based Composites with Shape Adaptability and Low Thermal Contact Resistance for Thermal Management

Poly(ionic liquid)s: A Promising Matrix for Thermal Interface Materials

Robust, self-healable, recyclable and thermally conductive silicone composite as intelligent thermal interface material

Lightweight, Electrical Insulating, and High Thermally Conductive All-Polymer Composites with Reinforced Interfaces

RGO-Coated Polyurethane Foam/Segmented Polyurethane Composites as Solid–Solid Phase Change Thermal Interface Material

Joint‐Inspired Liquid and Thermal Conductive Interface for Designing Thermal Interface Materials with High Solid Filling yet Excellent Thixotropy

Anti-leak, self-adaptive liquid metal-epoxy in-situ cured composites with ultra-low thermal resistance via flexible droplet inclusions

Thermally conductive, self-healing, and elastic Polyimide@Vertically aligned carbon nanotubes composite as smart thermal interface material

Can Adhesion Energy Optimize Interface Thermal Resistance at a Soft/Hard Material Interface?

Dry-Contact Thermal Interface Material with the Desired Bond Line Thickness and Ultralow Applied Thermal Resistance

Thermal, Mechanical and Electrical Properties of Carbon Fiber Fabric and Graphene Reinforced Segmented Polyurethane Composites