Abstract:Neutronic, thermal-hydraulics, and solid mechanics computations were used to study the different VVER-1000 reactors' operational conditions for the steady-state and the transient state. The main objective of these studies is to investigate the safe operating conditions, which is essential in determining the reactor safety limits. The coupling between different physics enables a better understanding of reactor phenomena and enhanced accuracy by reducing the assumption needed for separate calculations for different physics. MCNPX code is used to provide the source power distribution for two themes of calculations. The first theme is the analytical solution using MATLAB software, and the second theme is the finite element coupled physics using COMSOL Multiphysics. Analytical solutions using MATLAB software and results from COMSOL-Multiphysics were used to simulate the uncoupled analytical models and coupled models, respectively. The coupled theme provide feedbacks between different physics by iterating the solution between different physics; such as solving the heat transfer with taking into consideration the variation of the coolant velocity along the coolant channel and solving solid mechanics with taking into consideration the change of either the fuel and the clad temperatures distribution (thermal load) or the change in the coolant pressure (pressure load). While in the uncoupled solutions, certain assumptions reflect an average behavior for the effect of other physics on the physics under concern, such as the average pressure of the coolant and the average value for the coolant velocity. The obtained results are verified by comparing it to WIMS D-4 for neutronic calculations and COPERA-EN code for the thermal-hydraulic analytical solution. Also, thermal-hydraulic results by both coupled and uncoupled themes are verified against results from the final safety analysis report. The Departure from Nucleate Boiling Ratio (DNBR) and the Minimum Departure from Nucleate Boiling Ratio (MDNBR) were applied for the investigation of VVER-1000 reactor safety parameters. Solid mechanics, fluid dynamics and heat transfer were used to compute the maximum stress/maximum volumetric strain acting on both fuel and cladding material. Results from both methods satisfied the limits addressed by the designer and shows a good agreement with the other published works that used WIMS D-4 for neutronic calculations and COBRA-EN code for thermal-hydraulic calculations analytically. in addition, the maximum stress occurring on the fuel and clad materials didn't exceed the yield stress. Furthermore, the fuel material displacement didn't exceed the Helium gap thickness, which means the surface contact between the fuel and the clad material is impossible that prevents the chemical interaction between both fuel and clad at 1135 K.

Numerical study on the effect of moderator depletion on thermal behaviour of fully voided 220 MWe IPHWR channel during LOCA

Effect of sub-cooling on fuel channel behaviour during LOCA for Indian PHWR

Heat Transfer Effectiveness for Cooling of Canadian SCWR Fuel Assembly under the LOCA/LOECC Scenario

Analysis of hypothetical channel flow blockage of a tubular fuel assembly in a 10 MWth nuclear research reactor

Numerical Investigation on Boiling Crisis in a Full-Length 5 × 5 Fuel Assembly under Typical Pressurized Water Reactor Conditions

A Review of CFD Advancements Toward Thermal-Hydraulic Analysis of Prototypical Flow Conditions in PWR Subchannels

CFD Analysis on Subcooled Boiling Phenomena in PWR Coolant Channel

Thermal-hydraulic and solid mechanics safety analysis for VVER-1000 reactor using analytical and CFD approaches

Sub-channel thermal-hydraulic analysis for VVER- 1000 generation III PWR

Numerical study on inter-wrapper flow and heat transfer characteristics in liquid metal-cooled fast reactors

Analysis of heat transfer and solidification within CANDU corium

Study of Rod Ejection Accident Safety of PWR for Long-lived Fission Product Transmutation

Optimized Moderator Design and Analysis of a Pin-Type Supercritical Carbon Dioxide Reactor Based on Reactor Monte Carlo Code

Coupled irradiation-thermal-mechanical analysis of the solid-state core in a heat pipe cooled reactor

Core Design Study on CANDU-SCWR with 3D Neutronics/thermal-Hydraulics Coupling

Sub-Channel Analysis Of Scwr Assembly With Double-Row Rods

Analysis of Thermal Stratification Effects in the Ring Headers of the Passive Residual Heat Removal System of NHR-200-II

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Thermal and Mechanical Characteristics of the Moderator Cell in A Cold Neutron Source

Numerical Investigation of Process Parameter Effects on Flow Oscillations in a Natural Circulation Boiling Integral PWR-Type SMR Test Rig

Safety Analysis of Pressurized Water Reactors with Annular Fuel During Different Transients