Abstract:In water-cooled fusion reactors, the assessment of the primary system contamination is essential for waste management, machine availability, occupational radiation exposure, and radiological hazard determination. The primary cooling water is not only directly activated by the intense neutron field but is a contamination vector for a significant variety of gamma emitters with short to long decay half-lives. Corrosion products can be activated in those regions under neutron flux of the primary circuit and then released in the cooling water. In the EU-DEMO fusion power plant equipped with the Water-Cooled Lithium Lead Breeding Blanket (WCLL-BB) concept, the primary coolant undergoes intense neutron fields in the first wall and the breeding zone regions of the blanket. Activated Corrosion Products (ACPs) are then formed, released into the water, transported in the cooling loop and finally deposited onto the ex -vessel surfaces of the Primary Heat Transport System (PHTS), where working personnel are susceptible to being radiologically exposed. This work addresses the complete assessment of ACPs in the WCLL-BB PHTS of EU-DEMO. The simultaneous and multi-physical processes behind the ACP formation are tackled using the OSCAR-Fusion code, a comprehensive tool developed by the CEA (France) to assess contamination in fusion nuclear reactors. The whole system is modelled with zero-dimensional nodes with assigned geometrical, thermal-hydraulics, material and chemical parameters. Activation reaction rates integrated over the whole spectrum and calculated with MCNP are given to those regions exposed to the neutron flux. Results are provided in terms of mass and activity inventories of ACPs as deposit and inner oxide layers of components (pipes, heat exchangers, pumps...), ions in solution, particles in suspension, and filters and resins trapping. Mobilizable inventories such as ions, particles and deposits are important source terms in accidental scenario evolutions, while the whole activity inventory constitutes the main long-term gamma emitting source for dose rate maps determination in the tokamak building rooms housing the main PHTS equipment.

Deterministic analysis of residual heat removal from activated EU DEMO WCLL BB segments during ex-vessel LOCA

Preliminary safety analysis of an in-vessel LOCA for the EU-DEMO WCLL blanket concept

Preliminary sensitivity analysis for an ex-vessel LOCA without plasma shutdown for the EU DEMO WCLL blanket concept

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Thermofluid-dynamic and thermal–structural assessment of the EU-DEMO WCLL "double bundle" Breeding Blanket concept left outboard segment

3D transient CFD simulation of an in-vessel Loss-Of-Coolant Accident in the EU DEMO fusion reactor

Preliminary accident analysis of the loss of vacuum in vacuum vessel for the European DEMO HCPB blanket concept

Application of Inelastic Method and Its Comparison with Elastic Method for the Assessment of In-Box LOCA Event on EU DEMO HCPB Breeding Blanket Cap Region

Comprehensive Safety Analysis Code System for Nuclear Fusion Reactors III: Ex-Vessel LOCA Analyses Considering Passive Safety

Preliminary thermo-mechanical assessment of the Top Cap region of the Water-Cooled Lead-Ceramic Breeder Breeding Blanket alternative concept

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Thermal-hydraulic assessment of the Steam Generator mock-up for the EU DEMO WCLL using CFD co-simulation

Activated corrosion product contamination assessments of DEMO WCLL breeding blanket primary heat transport system

Analysis and optimization of the secondary circuit for the option WCLL BB direct coupling with small ESS of the EU DEMO power

Simulation of VVER-1000 Guillotine Large Break Loss of Coolant Accident Using RELAP5/SCDAPSIM/MOD3.5

System code simulation of DEMO WCLL central outboard blanket equatorial cell operational transients

CFD Analysis of the Passive Decay Heat Removal System of an LBE-Cooled Fast Reactor

Analytical Studies of Long-Term IRWST Injection Core Cooling under Small Break LOCA in Passive Safety PWR

Analysis of AP1000 Containment Passive Cooling System During a Loss-of-coolant Accident

Numerical Simulation of AP1000 LBLOCA with SCDAP/RELAP 4.0 Code

Transient Analysis on Helium Coolant Tube Break Accident of Dual-Functional Lithium Lead Test Blanket Module