Abstract:The electrical packaging for high power devices such as IGBT or MOSFET is achieved by heavy aluminum ultrasonic wire bonding. In this process, the amplitude stability of ultrasonic transducer determines the bonding quality, which demands more accuracy in resonant frequency tracking (RFT) and constant amplitude control (CAC). In this investigation, we proposed a vector based resonant frequency (VRFT) tracking and vector based constant amplitude control (VCAC) to control the ultrasonic transducer. The current of dynamic branch was conducted by calculating the voltage and current vector of ultrasonic transducer. Small signal model of ultrasonic transducer was established and applied into RFT and CAC. A control strategy of fuzzy self-tuning PID closed loop was utilized to RFT and CAC. The PID parameters was calculated by the linear control theories and modified by the fuzzy controller which improved the vibration stability of the transducer. A prototype of 100Watt/60kHz ultrasonic driver was self-developed to verify the VRFT and VCAC. It demonstrated that the locked frequency of VRFT can be controlled within less than 0.04 millisecond when staring from the swept frequency, and the vibration response is fast with the varying bonding pressure. The amplitude of fuzzy PID VCAC is more stable and robust compared to the classical PID control, which improved the bonded joint quality in heavy aluminum wire packaging. Note to Practitioners—This article was motivated by the reliability and efficiency of IGBT/ MOSFET device packaging through ultrasonic aluminum wire bonding. This bonding process requires more amplitude stability of the ultrasonic transducer to achieve acceptable bonded quality. Currently, the resonant frequency tracking (RFT) by classical PID control is in slow speed, and the amplitude of the transducer cannot be controlled constantly due to the inherent static capacitor of the transducer. These issues for the ultrasonic control are originated from the engineer’s experience or simple heuristic rule instead of advanced approaches. To improve the vibration performance, we proposed a vector based model consisting of the relationship the dynamic branch current and the total current of the transducer, to control the RFT and constant amplitude control (CAC). Moreover, the vector based is utilized into the fuzzy PID control, where the calculation is reduced by area coefficient defuzzy. The verification experiments prove that the response time of the proposed vector based RFT and CAC, and the bonded joint quality is optimized obviously. It is noted that in our control strategy, the RMS value, the phase of voltage and current of the transducer are acquired by DSP processor, and the calculation of fuzzy PID controller is not complicated, which is feasible to implement in application. This significantly benefits the demand of accurate control to the ultrasonic power in electronic packaging.

Hybrid Position/Force Fully Closed-Loop Control of a Flip-Chip Soft-Landing Bonding System

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

The Optimization Design of Wire Bonding Force Control System

A High-Efficiency Searching Time Reduction Method for VCM Soft-Landing Operation During Chip Bonding

A Hybrid Photovoltaic/flexoelectric Actuation Mechanism Applied to Precision Actuation and Vibration Control of Beams

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

A Novel Impedance Control Based on Equivalent Stiffness for Hydraulic Single-leg Robot

Design and Control of a Passive Compliant Piezo-Actuated Micro-Gripper With Hybrid Flexure Hinges

Novel multi-degree-of-freedom force–displacement mixed control framework for low loading rate substructure hybrid testing

Optimal Design of Micro-Force Sensor for Wire Bonding with High Acceleration and Frequent Movement

Design and control of a novel linear wire bonding head

Hybrid Bonding for Ultra-High-Density Interconnect

Toward Ultrasonic Wire Bonding for High Power Device: A Vector Based Resonant Frequency Tracking and Constant Amplitude Control

A planar parallel manipulator based novel MEMS device bonding system

A planar parallel manipulator based MEMS device bonding system

Coupled Force–Position Control for Dynamic Contact Force Tracking in Uncertain Environment

Flexure-Hinges Guided Nano-Stage for Precision Manipulations: Design, Modeling and Control