Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. Transient events in railway rolling noise, such as the characteristic impulsive noise at switches and crossings, can significantly contribute to the perceived annoyance, despite being difficult to detect in the standard frequency-domain methods to analyse rolling noise. Studying these transient effects and their perception requires predicting the noise in the time domain. While several time-domain approaches exist for predicting the dynamic interaction of wheel and rail, predicting the associated rolling noise with adequate accuracy is computationally costly. The lack of a model for transient noise and the need for studying its perception was recently identified. Aiming for a comprehensive time-domain radiation model that includes the wheel and track contributions to rolling noise, this work focuses on the track radiation. The modelling approach taken here is based on a 2.5D formulation for the acoustic radiation and moving Green's functions in the air. The computational cost, which lies mainly in the 2.5D BE calculations, is addressed by pre-calculating acoustic transfer functions. These transfer functions can be combined with different dynamic track models. Different dynamic track models in turn affect radiated sound field in different ways. Here, the sound fields produced by six different track models are compared, including different support types and analytical and numerical rail models. Several descriptors of the sound field are analysed. In terms of the radiated sound power and radiation efficiency, modelling the rail as a simple beam leads to similar results as elaborate numerical models up to about 5 kHz. In terms of the track-side sound pressure, simple beam models can provide similar results only up to 2.5 kHz. Euler-Bernoulli (E-B) beams seem unfit for time-domain predictions of the radiated noise as they over-estimate the bending wave speed at high frequencies. The results also show that the standard track decay rate (TDR) and the decay of acoustic sound pressure along the track are comparable.

Flanging, squeal and corrugation-induced noise: Insights from recent measurement campaigns at interconnected tight curves

Curve squeal in sharp curves: effect of multiple wheel/rail contact points

Towards the understanding of wheel-rail flange squeal: In-situ experiment and genuine 3D profile-enhanced transient modelling

Field measurement of rail corrugation influence on environmental noise and vibration: A case study in China

Field Measurement Analysis and Control Measures Evaluation of Metro Vehicle Noise Caused by Rail Corrugation

Short-pitch corrugation formation on resilient fastener metro tracks explained using rail-bending vibrations within the bogie wheelbase

Carriage interior noise-based inspection for rail corrugation on high-speed railway track

Wheel-rail noise: impact, random, corrugation and tonal noise

Theoretical investigation into the formation mechanism and mitigation measures of short pitch rail corrugation in resilient tracks of metros

Study on the effect of mitigation strategies for rail corrugation in metro lines

Rail Corrugation Characteristics Deduced from a Wavelet Analysis of High‐Speed Train Interior Noise and Vibration

Research on wheel-rail noise in rail corrugation road of urban rail transit

Numerical study on high-frequency effect of rail corrugation on subway-induced environmental vibrations

A Study on Relationship between Curving Noise and Wheel Wear in Seoul Subway System

A Root Cause of Curve Squeal: Self-Excited Frictional Vibration of a Wheelset–Track System

Towards time-domain modelling of wheel/rail noise: Effect of the dynamic track model

In-situ assessment of the sound and vibration reduction performance of a new type of resilient wheel installed on a metro train

Correlation of Short Pitch Rail Corrugation with Railway Wheel-Track Resonance at Low Frequencies of Excitation

Curve squeal of modern tramcars: comparison between independently rotating wheels and solid axles

On the rolling noise generation due to wheel/track parametric excitation