Abstract:For more than a century, rail corrugation has been exposed as one of the most serious problems experienced in railway networks. It also comes with a series of problems for maintenance, such as rolling noises and structural vibrations that can reduce lifetime of both train and track. This periodical phenomenon on rail surface is closely linked to wheel-rail contact dynamic, which depends on friction, train dynamics… To better understand corrugation birth conditions, a numerical model is suggested to complement the experimental limitations and to instrument a wheel-rail contact both locally and dynamically. At first, an appropriate tool was chosen to create the dynamic wheel-rail contact model to reproduce straight-track corrugation, also called “short-pitch” corrugation. The implicit dynamic finite element code Abaqus was chosen to investigate the dynamic local contact conditions. Both the origin and the evolution of straight-track corrugation under transient conditions (acceleration / deceleration) are studied. The parametrical sensibility of corrugation is thus investigated both with single/multiple wheel passing(s) and with geometric defect. A stick-slip phenomenon, linked to both wheel and rail dynamics coupled through the contact, is identified as the root of straight-track corrugation under transient conditions. Secondly, results obtained with the previous model have highlighted a quick decrease of corrugation amplitude with the increase of wheel passings over the rail. This last result seems to be in contradiction with reality. This problem comes from the difficulty to reliably manage contact dynamics, and particularly with local impacts, with the use of classical finite element models such as the one implemented in Abaqus. To compensate for this lack, a mass redistribution method is implemented in Abaqus and used with the previous case. The results show a more realistic corrugation growth according to the number of wheel passings.

Wheel-rail noise: impact, random, corrugation and tonal noise

On the impact noise generation due to a wheel passing over rail joints

Flanging, squeal and corrugation-induced noise: Insights from recent measurement campaigns at interconnected tight curves

WHEEL/RAIL ROLLING NOISE - THE EFFECTS OF NON- LINEARITIES IN THE CONTACT ZONE

THE EFFECTS OF NON-LINEARITIES AT THE WHEEL/RAIL INTERFACE ON THE GENERATION OF ROLLING NOISE

The radiation from railway wheel modes and their effect on loudness, sharpness, and equivalent pressure level

Rail Corrugation Characteristics Deduced from a Wavelet Analysis of High‐Speed Train Interior Noise and Vibration

An investigation into rail corrugation due to micro-slip under multiple wheel/rail interactions

Research on wheel-rail noise in rail corrugation road of urban rail transit

Study on Rail Corrugation Development Mechanisms

A HYBRID MODEL FOR THE NOISE GENERATION DUE TO RAILWAY WHEEL FLATS

Field Measurement Analysis and Control Measures Evaluation of Metro Vehicle Noise Caused by Rail Corrugation

Wheel-Rail Interface Condition Estimation (W-RICE)

On the rolling noise generation due to wheel/track parametric excitation

Correlation of Short Pitch Rail Corrugation with Railway Wheel-Track Resonance at Low Frequencies of Excitation

An investigation into the effect of rubber design parameters of a resilient wheel on wheel-rail noise

Research on the relationship between the rail corrugation and the vibration response of the wheel-rail system

VIBRATION ANALYSIS OF RAILWAY TRACK WITH MULTIPLE WHEELS ON THE RAIL

Towards the understanding of wheel-rail flange squeal: In-situ experiment and genuine 3D profile-enhanced transient modelling

Numerical tribology of the wheel-rail contact : Application to corrugation defect

Curve squeal in sharp curves: effect of multiple wheel/rail contact points