Abstract:The mechanism of rail corrugation remains unclear, and the research methods require improvement. The vibration characteristics represent the system's external manifestations, but a comprehensive analysis is still lacking. Taking the vibration characteristics of the wheel-rail system as a starting point, this study investigates the formation mechanisms of rail corrugation on measured metro lines. The line sections included both steel spring floating slab tracks and long sleeper embedded tracks. First, the wavelength and frequency attributes of rail corrugation were obtained through field measurements. Then, referencing line conditions, three-dimensional finite element numerical models were established, frequency response calculations were performed, and the relationship between the vibration responses of the wheel-rail system and rail corrugation was analyzed. Finally, a parameter sensitivity analysis of the wheel-rail system was conducted to control the further development of rail corrugation. The results show distinct corrugation phenomena on both inner and outer rails in the measured sections. The characteristic wavelengths of inner and outer rail corrugation on the steel spring floating slab track are 34 mm and 59 mm, respectively, and the characteristic wavelengths of inner and outer rail corrugation on the long sleeper embedded track are 46 mm and 47 mm, respectively. The frequency response analysis indicates that the numerical results exhibit eigenfrequencies close to the passing frequencies of the measured corrugations. The formation mechanism of inner rail corrugation on the steel spring floating slab track is attributed to the third-order bending vibration of the wheelset, which leads to the generation of inner rail corrugation. In contrast, the formation mechanism of outer rail corrugation is attributed to the lateral bending vibration of the outer rail. For the long sleeper embedded track, inner rail corrugation is generated by the lateral bending vibration of the inner rail, while outer rail corrugation results from the lateral bending vibration of the outer rail. Appropriate adjustments to the fastener's vertical and lateral stiffness, as well as the steel spring's vertical and lateral stiffness, can shift the rail corrugation eigenfrequencies, thereby inhibiting the development of corrugation with the original wavelength. Changes in other parameters have no effect on the rail corrugation eigenfrequencies and only influence the development speed of corrugation with the original wavelength. This research effectively elucidates the cause of rail corrugation from the system vibration perspective and provides a valuable complement to the corrugation analysis method.

Field Measurement Analysis and Control Measures Evaluation of Metro Vehicle Noise Caused by Rail Corrugation

Study on Frequency Characteristics of Rail Traffic Noise on Different Running Conditions

Field measurement of rail corrugation influence on environmental noise and vibration: A case study in China

[Optimally Control Urban Railway Noise by Sound Propagation Path].

Research on wheel-rail noise in rail corrugation road of urban rail transit

An Automated System for Position Monitoring and Correction of Chord-Based Rail Corrugation Measuring Points

Carriage interior noise-based inspection for rail corrugation on high-speed railway track

An investigation into the mechanism of metro rail corrugation using experimental and theoretical methods

Cause Analysis of Rail Corrugation in Metro Lines Based on System Vibration Characteristics

Theoretical investigation into the formation mechanism and mitigation measures of short pitch rail corrugation in resilient tracks of metros

Numerical study on high-frequency effect of rail corrugation on subway-induced environmental vibrations

Study on the effect of mitigation strategies for rail corrugation in metro lines

Effect of Rail Pad Stiffness on Vehicle–Track Dynamic Interaction Excited by Rail Corrugation in Metro

Study on the Mechanism of the Abnormal Phenomenon of Rail Corrugation in the Curve Interval of a Mountain City Metro

Study on the formation mechanism of rail corrugation in small radius curves of metro

Investigation on rail corrugation grinding criterion based on coupled vehicle–track dynamics and rolling contact fatigue model

The formation, development and classification of rail corrugation: a survey on Chinese metro

Study on the Formation Mechanism for High Rail Corrugation

Study of Noise and Vibration Impacts to Buildings Due to Urban Rail Transit and Mitigation Measures

Mechanism research and influence parameter analysis of rail corrugation of metro straight line track with steel spring floating slabs

Analysis of Metro Interior Noise Characteristics for Different Track Beds