Abstract:The intense interaction force between the wheel-rail causes the vibration of wheel and rail, and generates rolling noise. Increasing the rail damper is an effective way to suppress rail vibration. In this paper, a shear-type multi-band tuned rail damper (MTRD) consist of internal mass bars and external resilient layer to reduce rail vibration is proposed. Mass bars are wrapped inside resilient layer and placed along the length of rail. Resilient layer between two adjacent mass bars can enforce them perform shearing motion corresponding to the layer along the main vibration direction of rail. Different oscillation frequencies corresponding to different mass bars can be tuned by adjusting the structure of MTRD. It achieves an increase in the operating frequency band and a widening of the operating frequency range of MTRD. The influence of parameters of MTRD on its performance is investigated by the finite element method (FEM). One of three designed MTRD models is selected for prototype production after comparative analysis. Laboratory measurements are conducted on a rail specimen and 12 m track platform. Results show the main operating frequency band of designed MTRD is in the range of 200 Hz–800 Hz, achieves the goal of the desired frequency band. Frequency response function tests of rail on 12 m platform show the MTRD could suppress rail vibration in the range of 100–2000 Hz. To estimate the practical reduction effects of MTRD on vibration, a small radius curve of metro line is selected for field measurements. The measured track decay rate (DR) shows MTRD could increase DR at frequencies above 80 Hz with a max increment of 5 dB/m and 9.3 dB/m in vertical and lateral direction respectively. Reduction of rail vibration and rolling noise when trains pass is also measured. The overall vibration level of rail achieves a max reduction of 10.9 dB and 6.3 dB in vertical and lateral directions respectively. The overall sound pressure level is reduced by 5.9 dB(A) at the speed of 60 km/h.

Vibration damping to control railroad wheel squeal

Experiment Investigation of Constrained Layer Damping Used for Vibration Suppression of Railway Wheel

EXPERIMENTAL STUDY OF VISCOELASTIC DAMPING MATERIALS FOR VIBRATION ANG NOISE CONTROL WITHIN RAILWAY VEHICLES

Friction Management as a Sustainable Solution for Controlling Noise at the Wheel-Rail Interface

Experimental study of the effect of viscoelastic damping materials on noise and vibration reduction within railway vehicles

Constrained Damping Dynamic Absorber Stuck on a Rail of Urban Transits

In-situ assessment of the sound and vibration reduction performance of a new type of resilient wheel installed on a metro train

Integrated design of passive control methods for mitigating vibration and noise of rails in high-speed railway

Experimental Study on Viscoelastic Damping Materials for Noise Control in Railway Vehicles

Rail and wheel vibration absorber performance testing.

Viability Analysis of Waste Tires as Material for Rail Vibration and Noise Control in Modern Tram Track Systems

A Root Cause of Curve Squeal: Self-Excited Frictional Vibration of a Wheelset–Track System

Optimal design and experimental research of railway wheels with constrained damping treatment

Development of multi-band tuned rail damper for rail vibration control

Research on Noise Reduction Performance of Wheel–Rail with Amplitude Amplifying Vibration Absorber

Influence of wheel/rail lateral sliding stability on curve squeal noise

Investigation of Environmental Vibration Control for High Speed and Heavy Haul Railway

Composite embedded track structure considering temperature dependent characteristics for rolling noise reduction of inter-city railway system

Attenuating Railway Track Vibration by Rail Absorber for Noise Reduction

Long-Term Efficient Control of Structure-Borne Noise Inside Buildings Caused by Underground Railways by Using Novel Damping Fasteners

On the Railway Track Dynamics with Rail Vibration Absorber for Noise Reduction