Abstract:Curve squeal is one of the most annoying noise problems related to the operation of trains, trams, and metros in urban environments. It typically occurs in sharp curves, which are very common in urban areas, and is disturbing for both passengers and people in proximity to the line. Curve squeal is characterized by a loud tonal noise that usually occurs close to the natural frequencies of the wheel. It is generally attributed to the self-excited vibration of the wheel, as a result of the contact phenomena taking place at the wheel/rail interface during curve negotiation. An experimental campaign has been carried out on a sharp tramway curve to measure noise emission due to curve squeal. This revealed that different squealing frequencies and noise levels were generated by two different tramcars of the same type. The presence of a second contact point between the flange back of the leading inner wheel of one of the tramcars and the groove rail was found to be the reason behind these dissimilar experimental results. Thus, the aim of this work is to assess the role of the flange back contact condition on the excitation of squeal noise. A curve squeal prediction model is formulated in the frequency domain to include the presence of multiple wheel/rail contact patches. Numerical simulations reveal that this contact condition can significantly alter the squealing frequencies involved, similarly to what is observed in the pass by sound pressure measurements. The contact on the flange back is found to promote mode-coupling mechanisms in the proximity of close pairs of wheel vibration modes. These results suggest that the potential presence of multiple contacts between wheel and rail should be considered to obtain reliable curve squeal predictions.

A Study on Relationship between Curving Noise and Wheel Wear in Seoul Subway System

A Study on Relationship between Curving Noise and Wheel Wear in Seoul Subway System

A Root Cause of Curve Squeal: Self-Excited Frictional Vibration of a Wheelset–Track System

Influence of wheel/rail lateral sliding stability on curve squeal noise

Research on wheel-rail noise in rail corrugation road of urban rail transit

Study on the Mechanism of the Abnormal Phenomenon of Rail Corrugation in the Curve Interval of a Mountain City Metro

Flanging, squeal and corrugation-induced noise: Insights from recent measurement campaigns at interconnected tight curves

Curve squeal in sharp curves: effect of multiple wheel/rail contact points

Towards the understanding of wheel-rail flange squeal: In-situ experiment and genuine 3D profile-enhanced transient modelling

Development of analytical model for a wheel and rail vibration associated with curve squeal noise of railways

In-situ assessment of the sound and vibration reduction performance of a new type of resilient wheel installed on a metro train

Establishment and analysis of time domain model in wheel-rail lateral contact

The Noise Characteristics Research in Subway Cars

Study on train running safety in railway switches and sharp curves considering wheel wear evolution

Multi-Source Coupling Based Analysis of the Acoustic Radiation Characteristics of the Wheel-Rail Region of High-Speed Railways

A numerical study on locomotive wheel wear on curved track subjected to adhesion control

Wheel/rail Contact Performance on Curved Track of High-speed EMU with Elastic Model

Influence of wheel profile wear coupled with friction coefficient on the dynamic response of subway vehicles

A HYBRID MODEL FOR THE NOISE GENERATION DUE TO RAILWAY WHEEL FLATS

Investigation of the wear curves of the railway wheel and rail profiles when changing the radii of curvature

Prediction and Analysis of Wheel Flange Wear on Small Curved Track Considering Wheel-Rail Conformal and Lubricated Contact