Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Fire Resistant Design of Steel Structure

Behavior of High Strength Structural Steel at Elevated Temperatures

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Design of high strength steel columns at elevated temperatures

Fire resistance of steel structures, incorporating HSS - review and recommendations

When Fire Attacks: How does Concrete Stand up to Heat ?

Analysis on resistance on and after exposure to standard fire of short centrifuge concrete-filled steel tubular colunms

Research on Mechanical Behavior of the Steel-Concrete-Steel Composite Structures Subjected to High Temperature of Fire

Analysis of Design Load of Fire-Resistant Steel Beams under High Temperature Fire

Overall Buckling Behavior of Fire-Resistant Steel Welded I-section Columns under Ambient Temperature

Extension of the Continuous Strength Method to the design of steel I-sections in fire

Structural Response and Behavior Analyses of Steel Joint Components at Elevated Temperatures

Experimental study on the post-fire mechanical behaviours of structural steels

DISCUSSIONS ON THE ROBUSTNESS OF STEEL CONNECTIONS IN FIRE

High-temperature material degradation of Q345 cold-formed steel during full-range compartment fires

Nonlinear Pre-Fire and Post-Fire Analysis of Steel Frames

Numerical investigations of fire-resistant steel welded I-section columns under elevated temperatures

Experimental Investigation on Post-fire Response of Concrete-Filled Steel Tube Column Subjected to Elevated Temperature

Post-fire Mechanical Properties of Base Metal and Welds of Q235 Steel

Performance of Concrete-Filled Steel Tubular Column-Wall Structure Subjected to ISO-834 Standard Fire: Analytical Behaviour

Performance-based fire resistance design and analysis of high-rise steel towers