Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Fire resistance of steel structures, incorporating HSS - review and recommendations

Mechanical properties and design recommendations of very high strength steel S960 in fire

Fire Behavior and Performance of Concrete-Filled Steel Tubular Columns: Review and Discussion

Behavior of High Strength Structural Steel at Elevated Temperatures

A review of research on high-strength steel structures

Mechanical properties and modelling of superior high-performance steel at elevated temperatures

Constitutive Model of High-Performance Bolts at Elevated Temperatures

Design of high strength steel columns at elevated temperatures

Overall Buckling Behavior of Fire-Resistant Steel Welded I-section Columns under Ambient Temperature

Recent Research Advances of High Strength Steel Structures and Codification of Design Specification in China

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Research on the Seismic Performance of High Strength Steel Frames

Fire Resistant Design of Steel Structure

Design of Cold-Formed Stainless Steel RHS and SHS Beam–columns at Elevated Temperatures

Progress In Application And Research Of High Strength Steel Structures

Overall Buckling Behaviour of Superior High-Performance Steel Columns under Fire

Research Advances in HSS Structures at Tsinghua University and Codification of the Design Specification

Development And Application Of High Strength And High Performance Steel In Buildings

Numerical study and design of ultra-high-strength steel plate girders subjected to patch loading after elevated temperature

ENGINEERING APPLICATION AND RECENT RESEARCH PROGRESS ON HIGH STRENGTH STEEL STRUCTURES

Mechanical properties of very high strength steel at elevated temperatures