Abstract:CFMPs (cement and fly ash mixing piles) are used to reinforce fly ash foundation to solve the problem of a large amount of fly ash accumulation in coastal areas. CFMP-fly ash composite foundation is used as the foundation of coastal and coastal engineering. Through the indoor model test, the bearing characteristics and load transfer mechanism of CFMP-fly ash composite foundation under wave load were investigated. The results show that with the increase of wave load, the horizontal resistance of the fly ash stratum increases gradually, the soil resistance moves down, and the level of resistance shows nonlinear characteristics. The pile bending moment, pile displacement, and horizontal resistance of the CFMP composite foundation are concentrated in the upper pile and fly ash stratum, which can improve the ability of the composite foundation to resist horizontal load by improving the physical and mechanical properties of the upper fly ash stratum. Through the calculation of the load–displacement curve, it is found that the measured displacement value is closer to that obtained using the p – y curve method (a method for solving nonlinear lateral resistance of piles). The hysteretic curve area of cyclic loading decreases with the increase of cyclic number. The accumulation of elastoplastic deformation of pile shows that the properties of fly ash gradually change to elastic stage, cyclic loading can reduce the horizontal deformation modulus of composite foundation CFMP caused pile—fly ash system of weakening, in peak load reaches level under the critical state displacement curve showed a trend of the rapid growth of nonlinear, cyclic cumulative failure occurs, and the cyclic load limit state is reached, which affects the service performance of the whole structure.

Research on Engineering Characteristics of Cement Mixing Piles Strengthening Steel Sheet Pile Structure Wharf

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Performance analysis of cast-in-place tubular pile composite ground under embankment load

Analysis of cast-in-situ tubular piles in soft foundation improvement at bridge approaches

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Characteristic study on composite foundation with rigid-flexible piles under the load from embankment

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

Dynamic Response of Cement–Fly Ash Mixed Pile Composite Foundation Under Wave Load

Field tests and consolidation analysis of gravel pile composite foundation

Field Study of Bearing Behavior of Pile-Net Composite Foundation

Research On Settlement Calculation Method Of Composite Foundation Of Discrete Material Piles

Engineering Character of a New-Style Pretensioned Spun Concrete Nodular Pile

Composite Foundation of Deep Mixing Piles for Large Steel Oil Tanks on Soft Ground

Field Test Study on the Improvement Mechanism of Pile-Net Composite Foundation

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Deformation and Stability of the Seawall, Considering the Strength Uncertainty of Cement Mixing Piles

Consolidation analysis of cement-pile composite foundation under rigid foundation

Effect Analysis of Steel Sheet Pile Supporting for Utility Tunnel Foundation Pit in Water-Rich Soft Soil

Analytical Behavior of Concrete-Filled Steel Tubular Pile Used in Coastal Wharf Structure Subjected to Combined Loads