Abstract:Degradation of module encapsulant mechanical characteristics that lead to embrittlement and delamination remains a leading cause of failure in solar modules. Extending module lifetimes beyond 30 years requires advanced predictive modeling that includes the fundamental materials degradation pathways and their dependence on operating temperature, UV, and moisture. We present a time‐dependent multiscale mechanics model based on detailed molecular degradation reaction kinetics that connects the encapsulant bond density and interfacial bond density with its mechanical properties and adhesion energy. Photovoltaic (PV) modules are subjected to environmental stressors (UV exposure, temperature, and humidity) that cause degradation within the encapsulant and its interfaces with adjacent glass and cell substrates. To save experimental time and to enable long‐term assessment with intensive degradation only taking place after many years, the development of predictive models is indispensable. Previous works have modeled the delamination of the ethylene vinyl acetate (EVA) encapsulant/glass and encapsulant/cell interfaces under field aging conditions with fundamental photochemical degradation reactions that lead to molecular scission and loss of interfacial adhesion, characterized by the fracture resistance, Gc. However, these models were fundamentally limited in that the following aspects were not incorporated: (i) molecular crosslinking in the field, (ii) synergistic autocatalytic interactions of degradation mechanisms, (iii) connection between degraded encapsulant structure and its mechanical properties, and (iv) rigorous treatment of the plasticity contribution to Gc with finite element models. Here, we present a time‐dependent multiscale model that addresses these limitations and is applicable to a wide range of encapsulants and interfaces. For the reference EVA encapsulant and its interfaces with the glass and cell, the presented model predicts an initial rise in Gc in the first 3 years of field aging from crosslinking, then a subsequent sharp decline from degradation mechanisms. We used nanoindentation to measure the changes in EVA mechanical properties over exposure time to tune the model parameters. The model predictions of Gc and mechanical properties match with experimental data and show an improvement compared to previous models. The model can even predict switches in failure interfaces, such as the observed EVA/cell to EVA/glass transition. We also conducted a sensitivity analysis study by varying the degradation and crosslinking kinetic parameters to demonstrate their effects on Gc. Model extensions to polyolefin elastomer‐ and silicone‐encapsulants and their interfaces are also demonstrated.

Evaluating Durability of a Double Edge Sealant in a Floating Photovoltaic Application

Repair and preventive maintenance of photovoltaic modules with degrading backsheets using flowable silicone sealant

Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets

From performance measurements to molecular level characterization: Exploring the differences between UV and DH weathering of PV modules

Post‐Mortem Analysis of Building‐Integrated Flexible Thin Film Modules

Non-Destructive Failure Detection and Visualization of Artificially and Naturally Aged PV Modules

Early‐stage identification of encapsulants photobleaching and discoloration in crystalline silicon photovoltaic module laminates

Material characterization of seven photovoltaic backsheets using seven accelerated test conditions

XPS analysis of damp heat aged and fractured polymer/glass laminates

Towards validation of combined-accelerated stress testing through failure analysis of polyamide-based photovoltaic backsheets

Evaluation of Surface Crack Formation in Photovoltaic Backsheets Using Fragmentation and Finite Element Simulations

Nondestructive Estimation of Strength Deterioration in Photovoltaic Backsheets Using a Portable Near Infrared Spectrometer

Chemical and mechanical interfacial degradation in bifacial glass/glass and glass/transparent backsheet photovoltaic modules

Impact of environmental variables on the degradation of photovoltaic components and perspectives for the reliability assessment methodology

Lifetime Evaluation of Photovoltaic Polymeric Backsheets under Ultraviolet Radiation: From Chemical Properties to Mechanical Modeling

Nanoindentation Reveals Crosslinking Behavior of Solar Encapsulants—The Methodological Advantages over Bulk Methods

Predicting encapsulant delamination in photovoltaic modules bridging photochemical reaction kinetics and fracture mechanics

Enhancing photovoltaic modules encapsulation: Optimizing lamination processes for Polyolefin Elastomers (POE) through crosslinking behavior analysis

Development of Novel Frontsheets With Protective Coatings to Increase the Durability and Reliability of Glass‐Free Lightweight PV Modules

Differential degradation patterns of photovoltaic backsheets at the array level

A Comparison of Emerging Nonfluoropolymer-Based Coextruded PV Backsheets to Industry-Benchmark Technologies