Abstract:Degradation of module encapsulant mechanical characteristics that lead to embrittlement and delamination remains a leading cause of failure in solar modules. Extending module lifetimes beyond 30 years requires advanced predictive modeling that includes the fundamental materials degradation pathways and their dependence on operating temperature, UV, and moisture. We present a time‐dependent multiscale mechanics model based on detailed molecular degradation reaction kinetics that connects the encapsulant bond density and interfacial bond density with its mechanical properties and adhesion energy. Photovoltaic (PV) modules are subjected to environmental stressors (UV exposure, temperature, and humidity) that cause degradation within the encapsulant and its interfaces with adjacent glass and cell substrates. To save experimental time and to enable long‐term assessment with intensive degradation only taking place after many years, the development of predictive models is indispensable. Previous works have modeled the delamination of the ethylene vinyl acetate (EVA) encapsulant/glass and encapsulant/cell interfaces under field aging conditions with fundamental photochemical degradation reactions that lead to molecular scission and loss of interfacial adhesion, characterized by the fracture resistance, Gc. However, these models were fundamentally limited in that the following aspects were not incorporated: (i) molecular crosslinking in the field, (ii) synergistic autocatalytic interactions of degradation mechanisms, (iii) connection between degraded encapsulant structure and its mechanical properties, and (iv) rigorous treatment of the plasticity contribution to Gc with finite element models. Here, we present a time‐dependent multiscale model that addresses these limitations and is applicable to a wide range of encapsulants and interfaces. For the reference EVA encapsulant and its interfaces with the glass and cell, the presented model predicts an initial rise in Gc in the first 3 years of field aging from crosslinking, then a subsequent sharp decline from degradation mechanisms. We used nanoindentation to measure the changes in EVA mechanical properties over exposure time to tune the model parameters. The model predictions of Gc and mechanical properties match with experimental data and show an improvement compared to previous models. The model can even predict switches in failure interfaces, such as the observed EVA/cell to EVA/glass transition. We also conducted a sensitivity analysis study by varying the degradation and crosslinking kinetic parameters to demonstrate their effects on Gc. Model extensions to polyolefin elastomer‐ and silicone‐encapsulants and their interfaces are also demonstrated.

Early‐stage identification of encapsulants photobleaching and discoloration in crystalline silicon photovoltaic module laminates

Encapsulation of PV Modules Using Ethylene Vinyl Acetate Copolymer as the Encapsulant

XPS analysis of damp heat aged and fractured polymer/glass laminates

Environmental fatigue crack growth of PV glass/EVA laminates in the melting range

Enhancing photovoltaic modules encapsulation: Optimizing lamination processes for Polyolefin Elastomers (POE) through crosslinking behavior analysis

Crosslinking Behavior of Ethylene‐Vinyl Acetate Copolymer Encapsulants in Dependence of the Additive Composition

Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets

Effect of crosslinking on EVA-based encapsulant properties during photovoltaic module fabrication process

Assessing Field Degradation of PV Modules by Near‐Infrared Absorption Spectroscopy of Ethylene Vinyl Acetate Encapsulant

Non-Destructive Failure Detection and Visualization of Artificially and Naturally Aged PV Modules

Chemical and mechanical interfacial degradation in bifacial glass/glass and glass/transparent backsheet photovoltaic modules

From performance measurements to molecular level characterization: Exploring the differences between UV and DH weathering of PV modules

Progress of the Encapsulants for Photovoltaic Modules

Comparison of Degradation Behavior of Newly Developed Encapsulation Materials for Photovoltaic Applications under Different Artificial Ageing Tests

Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules

First principles modeling of polymer encapsulant degradation in Si photovoltaic modules

Predicting encapsulant delamination in photovoltaic modules bridging photochemical reaction kinetics and fracture mechanics

Nanoindentation Reveals Crosslinking Behavior of Solar Encapsulants—The Methodological Advantages over Bulk Methods

Investigation of the Potential-Induced Aging Phenomenon of an Insulating Encapsulant for a Photovoltaic Module: From Electrical to Chemical Properties

Simulation and Experimental Analysis of Temperature Profiles and Crosslinking in PV Module Lamination

UV‐induced degradation of high‐efficiency silicon PV modules with different cell architectures