Preparation and characterization of steel slag-based low, medium, and high-temperature composite phase change energy storage materials
Ke Liu,Hongxin Zhao,Zhangfu Yuan,Fei Zhao,Desheng Chen,Chunhong Shi
DOI: https://doi.org/10.1016/j.est.2022.106309
IF: 9.4
2022-12-09
Journal of Energy Storage
Abstract:In this study, industrial solid waste steel slag was used as supporting material for the first time, and polyethylene glycol (PEG), sodium nitrate (NaNO 3 ), and sodium sulfate (Na 2 SO 4 ) were used as low, medium, and high-temperature phase change materials (PCMs). A series of shape-stable composite phase change materials (C-PCMs) were prepared by vacuum impregnation and mixing-sintering methods. The morphology, thermal properties, and thermal reliability of C-PCMs were characterized by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), and differential scanning calorimetry (DSC). The results show that the three PCMs are uniformly dispersed in the pores of steel slag, and the maximum loading is 35 %, 40 %, and 50 %, respectively, and they have good chemical compatibility with steel slag. Compared with their pure PCMs, the three prepared C-PCMs showed a reduction in subcooling of 2.64 °C, 4.53 °C and 0.79 °C, respectively, and an increase in thermal conductivity of 172 %, 54.9 % and 82.4 %, respectively, all with good phase change thermal storage properties. Even after 100 thermal cycles, the latent heat retention rate was more than 97 %, which had good thermal reliability. Therefore, it can be concluded that the three kinds of low, medium, and high-temperature C-PCMs have considerable application potential in different temperature areas, such as building latent heat storage, solar energy storage systems, and industrial waste heat recovery system.
energy & fuels