Abstract:Investigations into Phase Change Materials (PCMs) for heat storage in facilities have gained significance, contributing to indoor temperature regulation, decreased energy usage, and improved building efficiency, thereby supporting sustainability initiatives. However, the issue of PCM leakage during the heating phase has constrained its thermal energy storage (TES) prospective at large scaled-practices. Addressing this concern, the present study emphases on elimination of the leakage problem of dodecyl alcohol (DA) as a PCM with appropriate melting temperature for building TES request by its impregnating into the natural zeolite (NZ) as a low cost host matrix. In the second stage of the work, using the developed shape stable-NZ/DA (SS-NZ/DA) composite PCM in cement mortar instead of sand, novel cementitious mortars with enhanced thermal properties were created by incorporating different weight percentages (25 %, 50 %, 75 %, and 100 %) compared to the mortar comprising NZ. Experimental works were carried out to analyze the shape-stability, TES features, cycling TES stability and thermal endurance of the SS-NZ/DA composite as well the physical properties, mechanical strength, and solar temperature regulation performance of the SS-NZ/DA included mortars. The SS-NZ/DA demonstrated the melting enthalpy of 107.5 J/g at 19.47 °C and a freezing enthalpy of 106.1 J/g at 19.86 °C. The performance test results obtained under real weather conditions indicated that the integration of SS-NZ/DA into mortar presented maximum drop of 10 % and 9.26 % in peak indoor temperature at the SS-CPCM slab surface and the center of SS-CPCM slab-cabin, respectively, accompanied by an approximate 3-hour time delay. Mortars with SS-NZ/DA composite PCM exhibited a decreased dry unit weight (1189 kg/m 3 ) and thermal conductivity (0.394 W/mK) while experiencing a moderate strength loss (4.5 MPa). These favorable physico-mechanical properties, TES characteristics and thermal management capability make the novel cementitious mortar containing composite PCM as an energy-efficient material for creating thermo-regulative building components. In this study, the natural, economical, and environmentally friendly nature of the NZ material used for PCM impregnation, its ability to contain a high percentage of PCM (up to 45 %) without any leakage issues, is the most fundamental and important characteristic of the composite used. The most unique feature of this composite mortar is the ability to achieve sufficient mechanical and thermal properties in cementitious mortars produced using this composite material without any leakage problems.

Experimental study and assessment of thermal energy storage mortar with paraffin/recycled brick powder composite phase change materials

Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Utilization of Form-Stable Paraffin/Nano-Silica Phase Change Materials for Thermal Energy Storage Enhancement in Mortar

Preparation and characterization of innovative cement mortar incorporating fatty acid/expanded graphite composite phase change material for thermal energy storage

Preparation, microstructure, performance and mortar application of paraffin/titanium-bearing blast furnace slag phase change aggregate

Characterization of Novel Shape‐stabilized Phase Change Material Mortar: Portland Cement Containing Na 2 SO 4 ·10H 2 O and Fly Ash for Energy‐efficient Building

A cost-effective form-stable PCM composite with modified paraffin and expanded perlite for thermal energy storage in concrete

Enhanced thermo-mechanical properties of cementitious composites via red mud-based microencapsulated phase change material: Towards energy conservation in building

Experimental Study on Preparation of a Novel Foamed Cement with Paraffin/ Expanded Graphite Composite Phase Change Thermal Energy Storage Material

Experimental investigation of thermal and mechanical characteristics of slag cement mortars with PCM for radiant floors

Thermophysical and Mechanical Properties of Hardened Cement Paste with Microencapsulated Phase Change Materials for Energy Storage

Characterization and Preparation of Paraffin/Modified Inorganic Porous Materials Composites As Building Energy Storage Materials

A novel cement mortar comprising natural zeolite/dodecyl alcohol shape stable composite phase change material for energy effective buildings

Development of Thermal Energy Storage Lightweight Structural Cementitious Composites by Means of Macro-Encapsulated PCM

Experimental Investigation on the Effects of Phase Change Material and Different Ventilation Modes on the Thermal Storage, Space Heating and Energy Consumption Characteristics of Ventilated Mortar Blocks

Thermal Conductivity Enhancement of Form-Stable Tetradecanol/expanded Perlite Composite Phase Change Materials by Adding Cu Powder and Carbon Fiber for Thermal Energy Storage

Thermoregulation Performance and Mechanical Properties of Phase Change Asphalt Mortars

Preparation and thermal characterization of paraffin/metal foam composite phase change material

Study on Preparation of Montmorillonite-Based Composite Phase Change Materials and Their Applications in Thermal Storage Building Materials

Preparation and Thermal Properties of Fatty Acid/diatomite Form-Stable Composite Phase Change Material for Thermal Energy Storage