Abstract:A major part of energy consumption is reported from the residential and commercial buildings due to the large usage of mechanical devices to maintain a comfortable indoor ambiance. Thermal conductivity of the materials used in these buildings can be reduced by using low density materials and an efficient thermal energy storage strategy. In the present paper, the thermal performance of a building envelope was improved by incorporating phase change material (PCM) into the foam concrete mix. At first, PCM was developed by using a light weight material, expanded vermiculite (EV) impregnated with capric acid (CA) and ethyl alcohol (EA) under vacuum conditions. Different foam composite mixes were prepared and experimentally tested. Foam concrete mixtures with EV, CA-EA/EV based PCM, and PCM with added nano silica and coir fiber combinations (PSC) were prepared by the replacement of fine aggregate (M−sand) in various weight percentages. This study reveals that PCM with a CA to EV proportion of 55% (wt.) had the maximum adsorption and stability, as assessed through liquid leakage. In addition to improving thermal efficiency, PCM enhanced foam concrete composites showed improved mechanical, hydration, durability, and thermal characteristics. In comparison to the control foam concrete and PCM foam concrete mixes, the addition of nano silica and coir fiber added foam concrete mixtures (PSC) demonstrated improved strength and shrinkage qualities. These improved properties are attributed to the pozzolanic activity of nano silica and the bridging effects resulting from the fiber to micro cracks. Apart from the durability and strength characteristics, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and thermogravimetry analysis (TGA) were adopted to characterize the morphological, chemical, and thermal aspects of the different foamed concrete mixtures. The DSC results proved that the PSC-5% foam concrete mixture had latent heat capacities of 43.90 J/g for cooling and 69.16 J/g for heating, with melting and solidification temperatures of 31.51 °C and of 21.77 °C, respectively. TGA also revealed that the proposed PCM composite has a high thermal resistance. The PSC-5% shows better compatibility as per SEM and EDS tests by the proper penetration of the nano silica in the foamed composites through the pores. Finally, the thermal analysis tests demonstrated that the PSC-5% has a thermal conductivity of 0.129 W/m-K, which is 49.60% lesser than the foam concrete control sample, and also possesses an improved heat storage capacity, which ensures better thermal comfort in buildings.

Multiphysics study on cement-based composites incorporating green biobased shape-stabilized phase change materials for thermal energy storage

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

Preparation and characterization of innovative cement mortar incorporating fatty acid/expanded graphite composite phase change material for thermal energy storage

Cement-based materials incorporated with polyethylene glycol/sepiolite composite phase change materials: hydration, mechanical, and thermal properties

Phase change materials embedded in expanded clay aggregates to develop energy storage concrete: A review

Enabling thermal energy storage in structural cementitious composites with a novel phase change material microcapsule featuring an inorganic shell and a bio-inspired silica coating

Enhanced thermo-mechanical properties of cementitious composites via red mud-based microencapsulated phase change material: Towards energy conservation in building

A Novel Phase-Change Cement Composite for Thermal Energy Storage: Fabrication, Thermal and Mechanical Properties

LC 3 with microencapsulated phase change materials for reducing embodied and operational carbon

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

Study on foam concrete incorporated with expanded vermiculite/capric acid PCM – A novel thermal storage high-performance building material

Thermal Behavior of Composite Phase Change Materials Based on Polyethylene Glycol and Expanded Vermiculite with Modified Porous Carbon Layer

Fabrication and Building Energy-Saving Performance Evaluation of Polyethylene Glycol/polymethyl Methacrylate/expanded Graphite Thermal Enhanced Shape-Stable Phase Change Material

Expanded waste glass/methyl palmitate/carbon nanofibers as effective shape stabilized and thermal enhanced composite phase change material for thermal energy storage

Octadecane/C-decorated Diatomite Composite Phase Change Material with Enhanced Thermal Conductivity As Aggregate for Developing Structural–functional Integrated Cement for Thermal Energy Storage

Experimental Study on Preparation of a Novel Foamed Cement with Paraffin/ Expanded Graphite Composite Phase Change Thermal Energy Storage Material

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

Thermal and mechanical performance assessment of composite (CPCM) for energy storage

Mechanical and Thermo-Physical Performances of Gypsum-Based PCM Composite Materials Reinforced with Carbon Fiber

Study of paraffinic and biobased microencapsulated PCMs with reduced graphene oxide as thermal energy storage elements in cement-based materials for building applications

Thermophysical and Mechanical Properties of Hardened Cement Paste with Microencapsulated Phase Change Materials for Energy Storage