Abstract:Here, we propose a recyclable approach using acrylonitrile-butadiene-styrene (ABS) residues from additive manufacturing in combination with low-cost and accessible graphite flakes as a novel and potential mixture for creating a conductive paste. The graphite particles were successfully incorporated in the recycled thermoplastic composite when solubilized with acetone and the mixture demonstrated greater adherence to different substrates, among which cellulose-based material made possible the construction of a paper-based electrochemical sensor (PES). The morphological, structural, and electrochemical characterizations of the recycled electrode material were demonstrated to be similar to those of the traditional carbon-based surfaces. Faradaic responses based on redox probe activity ([Fe(CN)6]3-/4-) exhibited well-defined peak currents and diffusional mass transfer as a quasi-reversible system (96 ± 5 mV) with a fast heterogeneous rate constant value of 2 × 10-3 cm s-1. To improve the electrode electrochemical properties, both the PES and the classical 3D-printed electrode surfaces were modified with a combination of multiwalled carbon nanotubes (MWCNTs), graphene oxide (GO), and copper. Both electrode surfaces demonstrated the suitable oxidation of nitrite at 0.6 and 0.5 V vs Ag, respectively. The calculated analytical sensitivities for PES and 3D-printed electrodes were 0.005 and 0.002 μA/(μmol L-1), respectively. The proposed PES was applied for the indirect amperometric analysis of S-nitroso-cysteine (CysNO) in serum samples via nitrite quantitation, demonstrating a limit of detection of 4.1 μmol L-1, with statistically similar values when compared to quantitative analysis of the same samples by spectrophotometry (paired t test, 95% confidence limit). The evaluated electroanalytical approach exhibited linear behavior for nitrite in the concentration range between 10 and 125 μmol L-1, which is suitable for realizing clinical diagnosis involving Parkinson's disease, for example. This proof of concept shows the great promise of this recyclable strategy combining ABS residues and conductive particles in the context of green chemical protocols for constructing disposable sensors.

Fabrication of Jello-Based Ag/AgCl Reference Electrode from Recyclable Resources to Enhance Undergraduate Laboratory Student Experience and its Promising Utilization in Corrosion and Electrochemical Sensing

Construction and Evaluation of Cheap and Robust Miniature Ag/AgCl Reference Electrodes for Aqueous and Organic Electrolytes

Fabrication and characterization of planar reference electrode for on-chip electroanalysis

Batch Fabrication of Miniaturized Ag/AgCl Reference Electrode with Ion Exchanging Micro-Nano-Pores by Silicon-Base Double-Side Anisotropic Etching Process

Reliable unencapsulated Ag/Ag 2 S micro-reference electrodes for battery research and other applications in organic media

Highly Stable Fibrous Solid-State Ag/AgCl Reference Electrode

A sulphide resistant Ag|AgCl reference electrode for long-term monitoring

Fibrous Ag/AgCl reference electrode guided by failure analysis for real-time wearable sweat analysis

Batch Microfabrication of Highly Integrated Silicon-Based Electrochemical Sensor and Performance Evaluation Via Nitrite Water Contaminant Determination

From Aluminum Foil to Personalized Medicine: Ecofriendly One-step Electrode Modification for Rapid Detection of Ertapenem and co-administered Medications

Batch Microfabrication and Testing of a Novel Silicon-Base Miniaturized Reference Electrode with an Ion-Exchanging Nanochannel Array for Nitrite Determination.

Study of a novel fabrication method of 3D Ag-based nanoporous structures for electrochemical detection

All-Additive Solution Processed Silver/Silver Chloride Reference Electrode for Handheld Ion-Sensitive Field-Effect Transistor Sensing System

Inducing and real-time monitoring of lead (de)sulfation processes using scanning electrochemical microscopy for applications in the refurbishment of lead-acid batteries.

An Improved Potentiostat/Galvanostat for Undergraduate-Designed Electrochemical Laboratories

Preparation and Characterization of the Solid‐state Ag/AgCl Reference Electrode for RC Structures

Recycling 3D Printed Residues for the Development of Disposable Paper-Based Electrochemical Sensors

Electrochemical Sensors, a Bright Future in the Fabrication of Portable Kits in Analytical Systems.

Long-Time Evaluation of Solid-State Composite Reference Electrodes

An electroplated Ag/AgCl quasi-reference electrode based on CMOS top-metal for electrochemical sensing

Stable Thin-Film Reference Electrode on Plastic Substrate for All-Solid-State Ion-Sensitive Field-Effect Transistor Sensing System