Abstract:Reference electrodes which demonstrate long-term potential stability are essential for many continuous monitoring applications and are commonly based on Ag|AgCl electrodes; however, these electrodes are susceptible to poisoning from aqueous sulphide species which are commonly present in wastewater and natural groundwater. This work presents a sulphide resistant solid-state reference electrode (SSRE) based on a composite material using suspended KCl electrolyte and sacrificial AgCl in a cross-linked polyvinyl acetate polymer matrix. Sulphidation of the sacrificial AgCl produces a stable Ag 2 S precipitate and prevents further ingress of the poisoning sulphide species through the composite material. A novel SSRE using this material is compared to a control SSRE without suspended AgCl and a typical liquid filled reference electrode. These three reference electrodes are studied using electrochemical impedance spectroscopy (EIS), and their application is also studied in potentiometric pH sensing and cyclic voltammetry (CV). The long-term sulphide resistance of the two SSREs is also studied with potentiometry, and cross-sections of these electrodes were examined using micro X-ray fluorescence (μXRF). Both SSREs demonstrated higher impedance than the liquid reference electrode but were similar to other SSREs reported in the literature. This impedance did not result a meaningful difference in potentiometric pH sensing or CV experiments done using typical scan rates. The KCl/AgCl SSRE exhibited remarkable sulphide resistance, with all samples demonstrating a stable potential without maintenance after ca . 120 days of continuous immersion in 1 g L −1 Na 2 S solution, whereas KCl SSRE samples all demonstrated significant drift before this time. μXRF sulphur maps revealed that suspended AgCl prevented sulphide ingress, thus protecting the embedded Ag|AgCl electrode. This work presents a reference electrode that could enable long-term monitoring in challenging sulphide solutions, and also highlights a novel approach for preventing reference electrode poisoning which could be more widely explored.

Design and Fabrication of an Ultra-low Noise Ag-AgCl Electrode

Fabrication and characterization of planar reference electrode for on-chip electroanalysis

Batch Microfabrication and Testing of a Novel Silicon-Base Miniaturized Reference Electrode with an Ion-Exchanging Nanochannel Array for Nitrite Determination.

An electroplated Ag/AgCl quasi-reference electrode based on CMOS top-metal for electrochemical sensing

Batch Fabrication of Miniaturized Ag/AgCl Reference Electrode with Ion Exchanging Micro-Nano-Pores by Silicon-Base Double-Side Anisotropic Etching Process

Construction and Evaluation of Cheap and Robust Miniature Ag/AgCl Reference Electrodes for Aqueous and Organic Electrolytes

Highly Stable Fibrous Solid-State Ag/AgCl Reference Electrode

Multielectrode Arrays at Wafer-Level for Miniaturized Sensors Applications: Electrochemical Growth of Ag/AgCl Reference Electrodes

All-Solid Ultralow Noise Electric Field Sensor Based on the Sol Adhesion Method for Telluric and Marine Electrode Field Detection

Evaluating and Developing a Reliable Reference Electrode for Choline Chloride Based Deep Eutectic Solvents

Fabrication of Jello-Based Ag/AgCl Reference Electrode from Recyclable Resources to Enhance Undergraduate Laboratory Student Experience and its Promising Utilization in Corrosion and Electrochemical Sensing

AC impedance of Ag/AgCl reference electrodes for use in disposable biosensors

A chalcohalide glass/alloy based Ag + ion - selective electrode with nanomolar detection limit

Development and Characterisation of Electroplating Silver/silver Chloride Modified Microelectrode Arrays

Fabrication and Characterization of an Innovative Integrated Solid-State Microelectrode

A sulphide resistant Ag|AgCl reference electrode for long-term monitoring

Fabrication of novel Ag/AgCl electrode pair on the template of carbon foam as marine electric field sensor and its electrochemical performances

Effect of Silver Chloride Content on the Performance of Fully Printed Fabric Electrodes for ECG Monitoring

A flexible Ag/AgCl micro reference electrode based on a parylene tube structure.

All-Additive Solution Processed Silver/Silver Chloride Reference Electrode for Handheld Ion-Sensitive Field-Effect Transistor Sensing System

Contamination-Free Reference Electrode Using Prussian Blue for Small Oxygen Sensors